+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: 306 HDI Water block / rad hose question (urgent :) ) (/showthread.php?tid=2334)
306 HDI Water block / rad hose question (urgent :) ) - darrenjlobb - 20-03-2012
Howdy,
Quick question for the HDI gurus, on the 306, does the lower rad hose still go on drivers side wing area and in around the back to the water pump distro block? Or does it come up across the front of the motor?
Does anyone have a photo of a 306 hdi engine from behind with the water block fitted?
Cheers, just got some compatibility issues as normal, and trying to find out if a 306 part will fix it, or if im going to have to just mod the crap out an xud one to make it fit!
xx
Re: 306 HDI Water block / rad hose question (urgent :) ) - Chris - 20-03-2012
There pretty much the same as the xud, the lower rad pipe come out and along the chassis leg.
Re: 306 HDI Water block / rad hose question (urgent :) ) - darrenjlobb - 20-03-2012
Ok, brings me onto next question, does anyone have one of these they can sell me?
Re: 306 HDI Water block / rad hose question (urgent :) ) - Chris - 20-03-2012
My mate should on his old hdi block, will ask later.
Re: 306 HDI Water block / rad hose question (urgent :) ) - darrenjlobb - 20-03-2012
Thanking you
Re: 306 HDI Water block / rad hose question (urgent :) ) - Dum-Dum - 20-03-2012
As Chris said, it runs below the chassis leg and round the back of the block. not too expensive new from pug IIRC
Re: 306 HDI Water block / rad hose question (urgent :) ) - darrenjlobb - 20-03-2012
Id rather give my money to someone on here than the robbing ****turds at my local pug dealer.
Re: 306 HDI Water block / rad hose question (urgent :) ) - darrenjlobb - 21-03-2012
EDIT
I think I may have sorted this now, will let you know in a few days, thanks for your help!
Re: 306 HDI Water block / rad hose question (urgent :) ) - Toms306 - 21-03-2012
Not sure if its relevant for what you're doing but I'm pretty sure the hose clip on the hdi is like a c clip and on the DT is a jubillee...so HDi hose may not fit.