+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: 406 elbow diameter (/showthread.php?tid=23280)
406 elbow diameter - tuttyboy84 - 16-04-2014
Does anyone know off the top of there head the diameter of the c5 bottom turbo pipe and the 406 inlet elbow
406 elbow diameter - Jtrigga - 16-04-2014
51mm if I remember correctly
RE: 406 elbow diameter - titch - 16-04-2014
What 406 inlet elbow are you using, one with the air dozer or without? I am not sure if they are the same or not.
And the c5 bottom pipe which end do you want to know, both ?
RE: 406 elbow diameter - tuttyboy84 - 16-04-2014
Is the air doser the erg???
RE: 406 elbow diameter - titch - 16-04-2014
(16-04-2014, 02:36 PM)tuttyboy84 Wrote: Is the air doser the erg???
It is part of the egr, and it is on the end of the inlet elbows on the later vehicles.
RE: 406 elbow diameter - tuttyboy84 - 16-04-2014
Ill try and get one without it and Im asking about the intercooler end of the c5 bottom pipe
RE: 406 elbow diameter - Slam Wagon - 16-04-2014
I think 63 and 57
RE: 406 elbow diameter - tuttyboy84 - 16-04-2014
Thats a bit poo as the outlets on my intercooler are 51mm
RE: 406 elbow diameter - titch - 16-04-2014
(16-04-2014, 05:25 PM)tuttyboy84 Wrote: Thats a bit poo as the outlets on my intercooler are 51mm
You can get a reducer
RE: 406 elbow diameter - Slam Wagon - 16-04-2014
Thats pretty standard. 51 is 2" and then 57 is 2.5". 51mm will be easier to fit past the rad and then somewhere in the piping you can step it up to 57 ready for the inlet.
RE: 406 elbow diameter - tuttyboy84 - 16-04-2014
I think ill use 2 inch pipe all the way to the inlet then use a reducer to fit it not sure how I can do the bottom pipe yet
RE: 406 elbow diameter - Slam Wagon - 17-04-2014
90 degree reducer.