+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: 22.2mm master cylinder from hdi/xsi (/showthread.php?tid=22504)
22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
Like the title please, cheap or free if you could because i plan to reseal it before i use it anyway.
According to the seal kit the master cylinder comes on most 306's. Its stamped on the side anyway.
Cheers.
Edit: Forgot to say must be non abs 4 port. Or have removable blanking plugs if you can remove them?
RE: 22.2mm master cylinder from hdi/xsi - ash23 - 24-03-2014
I have a 4 port master cylinder but dont know if its the size your after ?
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
On one side will be the part number and on the other in big numbers will be stamped the size. Mine has a load of shit on one side and then 19 in big numbers on the other... So if its a 22mm one it will have 22 on the side.
RE: 22.2mm master cylinder from hdi/xsi - ash23 - 24-03-2014
ok mate ill take a look after work
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
Cheers bud.
RE: 22.2mm master cylinder from hdi/xsi - Jimbo - 24-03-2014
Ive got one 17.50 posted 4 port off a '6
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
(24-03-2014, 04:37 PM)Jimbo Wrote: Ive got one 17.50 posted 4 port off a '6
To much for me bud i want one cheap! '6 ones are actually worth something because they're an upgrade im just after a boggo shit one that i can put on the 205 after i reseal it.
RE: 22.2mm master cylinder from hdi/xsi - Jimbo - 24-03-2014
No worries mate
RE: 22.2mm master cylinder from hdi/xsi - Frosty - 24-03-2014
I will have a look in the parts caravan this week for you mate and let you know
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
Thanks fantastic mr frost! :p
RE: 22.2mm master cylinder from hdi/xsi - zx_volcane - 24-03-2014
good luck with the reseal tom, i gave it a go with a ms and was a complete farce and never worked again, tbh if it isn't leaking might not be worth messing with.
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
(24-03-2014, 09:02 PM)zx_volcane Wrote: good luck with the reseal tom, i gave it a go with a ms and was a complete farce and never worked again, tbh if it isn't leaking might not be worth messing with.
Oh balls, your the only reason i was going to have a go lol! I seen yours in your project thread ages ago so thought id have a crack at it. Hmm.
RE: 22.2mm master cylinder from hdi/xsi - zx_volcane - 24-03-2014
yeah tried to reseal one that was leaking back into the servo
but it didn't end well, no idea what went wrong either, literally just replaced seals, piece of piss.
ended up locking brakes when up to temp
didn't i write all this up?
RE: 22.2mm master cylinder from hdi/xsi - Tom - 24-03-2014
Possibly but i cant for the life of me remember where i seen it.
RE: 22.2mm master cylinder from hdi/xsi - Tom - 26-03-2014
Anyone found one of these??
RE: 22.2mm master cylinder from hdi/xsi - Frosty - 26-03-2014
I should be going up the farm tonight so will have a look
RE: 22.2mm master cylinder from hdi/xsi - Frosty - 27-03-2014
I found a S16 MC last night. I guess its the end bit you measure? That was 19mm so i dunno if it is any good to you
RE: 22.2mm master cylinder from hdi/xsi - Tom - 27-03-2014
Its stamped/cast into the side what size it is. Research suggests that S16 ones are 22mm. Did you take a picture of it? Or remember if there was a number on the side?
RE: 22.2mm master cylinder from hdi/xsi - ash23 - 27-03-2014
I had alook but couldnt see any markings on mine mate
RE: 22.2mm master cylinder from hdi/xsi - Tom - 27-03-2014
Hmm thats weird
RE: 22.2mm master cylinder from hdi/xsi - ash23 - 27-03-2014
You got a pik of the location? just in case im being blind lol
RE: 22.2mm master cylinder from hdi/xsi - Tom - 27-03-2014
The one on my 205 is on the side of the the master cylinder, big numbers on the right hand side.
RE: 22.2mm master cylinder from hdi/xsi - Toms306 - 27-03-2014
On the 306s the number is underneath iirc? Sure I used a mirror to look for one last time....though this was about 3 years ago and my memory isn't the best lol.
RE: 22.2mm master cylinder from hdi/xsi - Frosty - 27-03-2014
(27-03-2014, 06:27 PM)Tom Wrote: Its stamped/cast into the side what size it is. Research suggests that S16 ones are 22mm. Did you take a picture of it? Or remember if there was a number on the side?
Will try and look tomorrow