+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Xantia manifold tight to master cylinder (/showthread.php?tid=21652)
Xantia manifold tight to master cylinder - mikey b - 24-02-2014
Fitted my xantia manifold and it's bleedy tight to the
Master cylinder any one had this before thanks
RE: Xantia manifold tight to master cylinder - WiNgNuTz - 24-02-2014
I'm not sure if i'm just tired, but that doesn't make a great deal of sense to me. Can you edit your post with a bit of punctuation, and try to explain that a bit better please?
RE: Xantia manifold tight to master cylinder - zx_volcane - 24-02-2014
There is both a short and a long version of the that type of inlet manifold.
You can either try and find another one that is shorter, or get handy with the grinder to make some clearance.
RE: Xantia manifold tight to master cylinder - mikey b - 24-02-2014
Basically the manifold is tight to the master cylinder when it's on yep I will prob just get handy with the grinder
Xantia manifold tight to master cylinder - Frosty - 24-02-2014
I'll have a look at mine at lunch
RE: Xantia manifold tight to master cylinder - Chris_90 - 24-02-2014
Mine was tight on 205 bend the brake line slightly and it fits now event still very tight but it's not touching it any more
RE: Xantia manifold tight to master cylinder - Nath140889 - 24-02-2014
Heard of this before u can get a slight but of movement away from the master cylinder by adjusting the gearbox mount as it apparently slides left to right a bit when fitting
RE: Xantia manifold tight to master cylinder - mikey b - 24-02-2014
(24-02-2014, 08:56 PM)Nath140889 Wrote: Heard of this before u can get a slight but of movement away from the master cylinder by adjusting the gearbox mount as it apparently slides left to right a bit when fitting
Cool thanks will try this as well as grinding the manifold a little bit
RE: Xantia manifold tight to master cylinder - padge - 25-02-2014
I ran the xantia mani, was very close but never had issues, the 406 inlet mani is the shorter one, but imo dosent look as good.