+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Drivers side driveshaft bearing stuck (/showthread.php?tid=21416)
Drivers side driveshaft bearing stuck - HDIkyle - 16-02-2014
Loosened both nuts obviously but its not judging. Giving it a good beating its starting to mash it up where it comes tho the engine mount. Anyone any ideas?
RE: Drivers side driveshaft bearing stuck - titch - 16-02-2014
(16-02-2014, 01:35 PM)HDIkyle Wrote: Loosened both nuts obviously but its not judging. Giving it a good beating its starting to mash it up where it comes tho the engine mount. Anyone any ideas?
are you 100% sure that you have turned the bolts through 180 as i had similar issues on mine, i had loosened the nuts and turned the bolts enough so i thought but one was still catching so it wouldn't budge.
RE: Drivers side driveshaft bearing stuck - HDIkyle - 16-02-2014
Ye positive I can see them but even if they had turned back it would come out so far then stop. It's not moved a mm so far its just chewing the bearing up
RE: Drivers side driveshaft bearing stuck - Toms306 - 16-02-2014
You need a bigger hammer.
RE: Drivers side driveshaft bearing stuck - Danny2009 - 17-02-2014
As Tom said, big flat blade/chisel just under the shaft too of the bearing so you don't damage the bearing and mount and smack It with a big hammer will come out