+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: splitter (/showthread.php?tid=20611)
Pages:
1
2
splitter - azzaboi306 - 20-01-2014
Whats the biggest splitter I can fit to a ph 3?
RE: splitter - DazzaHDI - 20-01-2014
Vented espace splitter?
RE: splitter - azzaboi306 - 20-01-2014
Will it fit straight on? And biggest as in closest to the floor?
(20-01-2014, 12:12 AM)DazzaHDI Wrote: Vented espace splitter?
But thanks, il have a look about getting one
RE: splitter - RetroPug - 20-01-2014
You'll need to drill holes in the splitter (it's made of hard rubber so not a problem, and cut the ends off to make it the right length.
Then you just bolt it to the bumper using the holes in the underside of the bumper.
RE: splitter - Slam Wagon - 20-01-2014
Its quite square and i doubt it would look great but the corrado vr6 splitter is 90mm
RE: splitter - azzaboi306 - 20-01-2014
(20-01-2014, 09:03 AM)RetroPug Wrote: You'll need to drill holes in the splitter (it's made of hard rubber so not a problem, and cut the ends off to make it the right length.
Then you just bolt it to the bumper using the holes in the underside of the bumper.
Yeah I know about fitting it juat wondered if its the right size, but thanks
(20-01-2014, 09:15 AM)PE02KHG Wrote: Its quite square and i doubt it would look great but the corrado vr6 splitter is 90mm
Haha awesome thanks, I'll have a look
RE: splitter - RetroPug - 20-01-2014
It's too long at either end, however it is very easy to cut as it is rubber.
RE: splitter - azzaboi306 - 20-01-2014
(20-01-2014, 12:06 PM)RetroPug Wrote: It's too long at either end, however it is very easy to cut as it is rubber.
Okay sweet cheers
RE: splitter - DazzaHDI - 20-01-2014
Retro pug is spot on there, or you could have the Laguna splitter? Which hasn't got that extra lip on the bottom, not sure on the corrado one, never looked at one *goes and looks*
RE: splitter - azzaboi306 - 20-01-2014
(20-01-2014, 01:14 PM)DazzaHDI Wrote: Retro pug is spot on there, or you could have the Laguna splitter? Which hasn't got that extra lip on the bottom, not sure on the corrado one, never looked at one *goes and looks*
Whats the difference between the laguna one and espace one? And the corrado one doesn't look like it will fit? And dont think it's to sensible because my car is lowered by 60mm ish...
RE: splitter - RetroPug - 20-01-2014
I've got a vented laguna splitter, not sure what the difference is really without having them side by side.
It scraped a tiny bit very occasionally on my std. ride height '6 but only on very big speed bumps and sloped driveways, and it's rubber and flexible so no bother really.
Where are you based?
RE: splitter - azzaboi306 - 20-01-2014
(20-01-2014, 01:45 PM)RetroPug Wrote: I've got a vented laguna splitter, not sure what the difference is really without having them side by side.
It scraped a tiny bit very occasionally on my std. ride height '6 but only on very big speed bumps and sloped driveways, and it's rubber and flexible so no bother really.
Where are you based?
Fair enough, haha my road has speed bumps in and my drive is sloped :L, and Bournemouth, you?
You got a photo of your car with the splitter on?
RE: splitter - RetroPug - 20-01-2014
(20-01-2014, 01:48 PM)azzaboi306 Wrote: Fair enough, haha my road has speed bumps in and my drive is sloped :L, and Bournemouth, you?Oxford, but sometimes the midlands. Was wondering if you wanted mine, not sure whether I can be bothered to post it yet lol.
You got a photo of your car with the splitter on?
At the bottom of the first post is an action shot at the ring: http://306oc.co.uk/forum/thread-19890.html
Shown below on my Ph.2.
RE: splitter - DazzaHDI - 20-01-2014
Yeah that's the Laguna splitter, the espace splitter has an extra lip underneath, I think I have a pic on my phone but I'm on my phone at the moment :/
RE: splitter - azzaboi306 - 20-01-2014
(20-01-2014, 02:46 PM)RetroPug Wrote:(20-01-2014, 01:48 PM)azzaboi306 Wrote: Fair enough, haha my road has speed bumps in and my drive is sloped :L, and Bournemouth, you?Oxford, but sometimes the midlands. Was wondering if you wanted mine, not sure whether I can be bothered to post it yet lol.
You got a photo of your car with the splitter on?
At the bottom of the first post is an action shot at the ring: http://306oc.co.uk/forum/thread-19890.html
Shown below on my Ph.2.
fair enough, and hahaha, well if your guna sell it i'll happily buy it, and that does look pretty beaut! we have an espace in for mot tomorrow, might unbolt it
(20-01-2014, 08:53 PM)DazzaHDI Wrote: Yeah that's the Laguna splitter, the espace splitter has an extra lip underneath, I think I have a pic on my phone but I'm on my phone at the moment :/
oh right, haha, can you show me the other one when you have time please?
RE: splitter - RetroPug - 21-01-2014
They look largely the same but the espace ones stick out a bit more I think, both come either vented (the holes at the edges) or unvented.
I really like mine on the Ph.2 but that's being killed soon and I'm not sure they look as good on Ph.1s...
RE: splitter - azzaboi306 - 21-01-2014
(21-01-2014, 12:13 PM)RetroPug Wrote: They look largely the same but the espace ones stick out a bit more I think, both come either vented (the holes at the edges) or unvented.
I really like mine on the Ph.2 but that's being killed soon and I'm not sure they look as good on Ph.1s...
Yeah ive noticed the difference now betweeen yours and the espace, and fair enough
RE: splitter - DazzaHDI - 22-01-2014
not the best pic but heres the Espace one :
[attachment=12982]
heres the Laguna one :
[attachment=12984]
see how the Espace has the extra lip underneath, sorry about the sh*t pics
RE: splitter - azzaboi306 - 25-01-2014
(22-01-2014, 07:37 PM)DazzaHDI Wrote: not the best pic but heres the Espace one :
heres the Laguna one :
see how the Espace has the extra lip underneath, sorry about the sh*t pics
yee think the espace one is nicer, and haha no worries
RE: splitter - Piggy - 25-01-2014
What about the Leon one?
RE: splitter - azzaboi306 - 25-01-2014
(25-01-2014, 02:06 PM)Piggy Wrote: What about the Leon one?
does it fit okay?
RE: splitter - Piggy - 25-01-2014
Not sure tbh, but know a few have done so
RE: splitter - azzaboi306 - 25-01-2014
(25-01-2014, 02:10 PM)Piggy Wrote: Not sure tbh, but know a few have done so
oh right fair play, il look into it, thanks
RE: splitter - Choppin - 25-01-2014
Mk5 Astras and twintop splitters fit, needs a inch cutting from the centre but other than that was a straight forward spliter to fit, believe it 2 b a lil bigger than the Laguna 1
RE: splitter - azzaboi306 - 25-01-2014
(25-01-2014, 02:18 PM)Choppin Wrote: Mk5 Astras and twintop splitters fit, needs a inch cutting from the centre but other than that was a straight forward spliter to fit, believe it 2 b a lil bigger than the Laguna 1
okay sweet thanks, and do you leave it with a split in the middle? or can you get it like plastic welded?
RE: splitter - Choppin - 25-01-2014
They come in 2 pieces and normally slot together in the middle, I just used a lil bit of bonder that I use 2 stick spoilers n stuff on cars @ work n put a sh*te load behind it, think thers a photo of it on here somwhere!! Haha il av a butchers 4 ya mate
RE: splitter - azzaboi306 - 25-01-2014
(25-01-2014, 02:35 PM)Choppin Wrote: They come in 2 pieces and normally slot together in the middle, I just used a lil bit of bonder that I use 2 stick spoilers n stuff on cars @ work n put a sh*te load behind it, think thers a photo of it on here somwhere!! Haha il av a butchers 4 ya mate
ohh right, hahahaha fair enough, and sweet
RE: splitter - Choppin - 25-01-2014
Here's a link 2 the tread with a photo of the splitter I had on my XSi
http://306oc.co.uk/forum/thread-7668.html?highlight=Splitters
RE: splitter - azzaboi306 - 25-01-2014
(25-01-2014, 02:41 PM)Choppin Wrote: Here's a link 2 the tread with a photo of the splitter I had on my XSi
http://306oc.co.uk/forum/thread-7668.html?highlight=Splitters
looks pretty sweet, how low was that car?
RE: splitter - Choppin - 25-01-2014
Was told it was standard hight but parked next to other 306's it was a tiny bit lower, the splitter was made out of a rubber not plastic so it bends a lil as well