+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Wheel bolts with nimrods (/showthread.php?tid=20111)
Wheel bolts with nimrods - Jtrigga - 03-01-2014
I know they will need spacers to fit but will these bolts be alright I'm not sure if I would need flat seated? http://bit.ly/1fx2Nre
RE: Wheel bolts with nimrods - Curt - 03-01-2014
Yeah, you need flat seated. I used extended bolts with conical>flat adapters, like these: http://www.ebay.co.uk/itm/M12-FLAT-SEAT-TO-60-DEGREE-TAPERED-ALLOY-WHEEL-BOLT-WASHER-PEUGEOT-CITROEN-OPEL-/141031203276?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item20d61d61cc
RE: Wheel bolts with nimrods - Frosty - 03-01-2014
(03-01-2014, 11:06 PM)Curt Wrote: Yeah, you need flat seated. I used extended bolts with conical>flat adapters, like these: http://www.ebay.co.uk/itm/M12-FLAT-SEAT-TO-60-DEGREE-TAPERED-ALLOY-WHEEL-BOLT-WASHER-PEUGEOT-CITROEN-OPEL-/141031203276?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item20d61d61cc
What size spacers did you use?
RE: Wheel bolts with nimrods - Curt - 03-01-2014
15mm on the back, nothing on the front.
Wheel bolts with nimrods - Jtrigga - 04-01-2014
So these would work with the bolts that come with the spacers in the advert I put up?
RE: Wheel bolts with nimrods - Curt - 04-01-2014
I can't see why not, they both say 60 degree taper. That's not where I got them from by the way, just some I found from a quick search.
Wheel bolts with nimrods - Jtrigga - 04-01-2014
Thanks mate that's a big help
that price isn't too bad for the washers did you get them cheaper than that then?