+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Oil cooler takeoff on rad (/showthread.php?tid=19320)
Oil cooler takeoff on rad - HDIkyle - 04-12-2013
Got a new rad phase 1 off a s16 but it don't have the oil cooler outlet the one that points towards the passenger side on the back. Is there anyway around this? Maybe pipe it into the top pipe instead?
RE: Oil cooler takeoff on rad - cully - 04-12-2013
sounds like you need a GTI6 rad
RE: Oil cooler takeoff on rad - HDIkyle - 04-12-2013
Ye so are all s16 fads different ? Might just bond the pipe on
RE: Oil cooler takeoff on rad - cully - 04-12-2013
think the 6 is the only one with the oil cooler take off in the centre left of the rad
not sure others even have the oil cooler
RE: Oil cooler takeoff on rad - HDIkyle - 04-12-2013
Dturbo do all ones iv had anyway come like that standard. Might be able to do something tho. Take it off other rad maybe
RE: Oil cooler takeoff on rad - welshpug - 04-12-2013
phase 1 DTurbo rad is similar.
Oil cooler takeoff on rad - Sambarker - 05-12-2013
I've got a ph1 nissens rad for a dt
RE: Oil cooler takeoff on rad - darrenjlobb - 05-12-2013
The ph1 DT rad has it.
Just T it into the lower rad hose.
The engine simply uses the oil cooler as an "extra" feed from "rad" to "water pump"
RE: Oil cooler takeoff on rad - HDIkyle - 05-12-2013
Ok cheers so its not a return