306 D turbo Clutch options - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16) +--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: 306 D turbo Clutch options (/showthread.php?tid=18994) Pages:
1
2
|
306 D turbo Clutch options - AssMonkey13 - 19-11-2013 alright guys!! i brought a d turbo 2 weeks ago its a ph2 one ! the clutch is nearly on its way out , just wondering what clutch options i can go down, me and a friend are going to tune the car and make it into a sleeper hopefully its going to run around 180bhp by the time we are done soo yeah what clutches would you recommend?? RE: 306 D turbo Clutch options - Jimbo - 19-11-2013 Cg motorsport 4 paddle unsprung clutch plate and a valeo. Pressure plate is what a few of my mates are using RE: 306 D turbo Clutch options - AssMonkey13 - 19-11-2013 ahh cool ! do you know how much they are? RE: 306 D turbo Clutch options - Jimbo - 19-11-2013 Just a friction plate alone is like 150ish I think :/ RE: 306 D turbo Clutch options - strictly_perv - 19-11-2013 My one cost £220 I think. To be fair though you can get away with a decent stock clutch like a Valeo. RE: 306 D turbo Clutch options - AssMonkey13 - 19-11-2013 hmmm that's not bad to be honest , hopefully me and my friend can make a really nice sleeper out of mine! wouldn't the valeo one slip ive heard good and bad things about them running a bit more bhp?? RE: 306 D turbo Clutch options - Piggy - 19-11-2013 Im a running a standard genuine valeo dt clutch. 2.1, 12v with a gt2056s....masses of torque and its done 3000miles of fine driving so far RE: 306 D turbo Clutch options - silverzx - 19-11-2013 Standard valeo for the price.. RE: 306 D turbo Clutch options - c.gerrard - 19-11-2013 Stock clutch for now. Spend your time and money reaching your figure first RE: 306 D turbo Clutch options - Piggy - 19-11-2013 can upgrade just friction plate with CG for around £100. keeping the gen valeo pressure plate RE: 306 D turbo Clutch options - strictly_perv - 19-11-2013 (19-11-2013, 10:20 PM)Piggy Wrote: can upgrade just friction plate with CG for around £100. keeping the gen valeo pressure plate Can you buy stock pressure plates on their own though? RE: 306 D turbo Clutch options - Frosty - 19-11-2013 As jimbo said CG paddle unsprung friction plate and vaelo pressure plate. That's what im running. I got lucky and got an old stock motaquip clutch (which is valeo) off ebay for £30 and used the pressure plate from that and I got the friction plate from CG which the guy did me a deal on 2 for £250 the pair, I think there usually £150 ish each for the friction plate he said. RE: 306 D turbo Clutch options - strictly_perv - 19-11-2013 They are pretty good at CG for discounting I would do a group buy but I've still got my old one sat in the garage waiting to go on the sedan. RE: 306 D turbo Clutch options - Frosty - 19-11-2013 I was pretty impressed with them. Only took a couple of days to come which wasn't to bad as im pretty sure they make to order RE: 306 D turbo Clutch options - mr_fish - 20-11-2013 stock valeo clutch will hold up to 300lbft Ruan - DT with GT2052V, TMIC, 11mm, Water Injection - 175.3hp 313lb.ft torque Depends on what turbo you are running/going to run. RE: 306 D turbo Clutch options - AssMonkey13 - 20-11-2013 soo basically what your saying guys go with the stock valeo for the time being and when we have more bhp and if i have any problems from there consider a CG motorsports one ?? RE: 306 D turbo Clutch options - Frosty - 20-11-2013 Yeah that sounds a good plan. I only changed mine cuz it was slipping even though I don't have a massive amount of torque. When I took the standard clutch off there didn't seem to be any thing wrong with it but it was defo slipping and since I have fitted the paddle clutch I haven't had any clutch slip problems RE: 306 D turbo Clutch options - silverzx - 20-11-2013 Personally I'd go genuine VALEO as you've mentioned and then move onto something beefier if that eventually wears out. 306 D turbo Clutch options - sherman306 - 20-11-2013 What do you guys rate LUK clutches like? RE: 306 D turbo Clutch options - silverzx - 20-11-2013 From what I remember LUK is rated more then Valeo for HDi's not sure about XUD's. Probably CG>LUK>VALEO. RE: 306 D turbo Clutch options - Daniel306 - 20-11-2013 Im using a borg and beck with a td04, only really use the car at the weekends so its done about 8-10k of abuse and not slipped once RE: 306 D turbo Clutch options - Mal - 20-11-2013 (20-11-2013, 03:37 PM)Daniel306 Wrote: Im using a borg and beck with a td04, only really use the car at the weekends so its done about 8-10k of abuse and not slipped once Same here, using a Borg and Beck this last 40k miles, last 8k of which are on a K14-2. No problems atall! RE: 306 D turbo Clutch options - AssMonkey13 - 20-11-2013 hmm might go for valeo clutch then and see what happens from there ! 306 D turbo Clutch options - sherman306 - 20-11-2013 Sweet LUK are over a tenner cheaper 56 quid for a 3 piece clutch RE: 306 D turbo Clutch options - Frosty - 20-11-2013 (20-11-2013, 08:17 PM)sherman306 Wrote: Sweet LUK are over a tenner cheaper 56 quid for a 3 piece clutch To be honest I would stick a valeo in for the little extra as that's what everyone recommends for XUDs and its tried and tested. I haven't really heard anything on LUK clutches in XUDs RE: 306 D turbo Clutch options - Daniel306 - 20-11-2013 I thought LUK are on par with Valeo? is it not normal to get a valeo in a LUK box? RE: 306 D turbo Clutch options - Frosty - 20-11-2013 (20-11-2013, 09:51 PM)Daniel306 Wrote: I thought LUK are on par with Valeo? is it not normal to get a valeo in a LUK box? They could very well be but I don't hear people going on about LUK like they do with valeo 306 D turbo Clutch options - sherman306 - 20-11-2013 LUK are ment to be complete oe spec and there warranty system is pretty decent RE: 306 D turbo Clutch options - silverzx - 21-11-2013 As long it's LUK/Valeo/CG I wouldn't worry. It's the cheapo unknown eBay special brands you need to worry about. RE: 306 D turbo Clutch options - mr_fish - 21-11-2013 (21-11-2013, 09:44 AM)silverzx Wrote: As long it's LUK/Valeo/CG I wouldn't worry. ^^ What he said |