+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XU Petrol Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=17)
+--- Thread: 3.0 306 v6 (/showthread.php?tid=17676)
3.0 306 v6 - bradh511 - 29-09-2013
Help please people anyone can't bleed rad
RE: 3.0 306 v6 - Tom - 29-09-2013
2lt coke bottle fill it with water stick it in the hole, open the bleed points one by one starting from the bottom and working up, keep open until you get a constant stream of water.
Also wrong section.
RE: 3.0 306 v6 - bradh511 - 29-09-2013
(29-09-2013, 05:36 PM)Tom Wrote: 2lt coke bottle fill it with water stick it in the hole, open the bleed points one by one starting from the bottom and working up, keep open until you get a constant stream of water.
Also wrong section.
Thanks tom tried that anyone local and fancy poping out
RE: 3.0 306 v6 - Face. - 29-09-2013
(29-09-2013, 05:41 PM)bradh511 Wrote:(29-09-2013, 05:36 PM)Tom Wrote: 2lt coke bottle fill it with water stick it in the hole, open the bleed points one by one starting from the bottom and working up, keep open until you get a constant stream of water.
Also wrong section.
Thanks tom tried that anyone local and fancy poping out
It's easy as above make sure the bottle has a good seal mate.
Is the system pressurizing tho?
RE: 3.0 306 v6 - Tom - 29-09-2013
Sounds like your not doing it right, or it doesnt need bleeding and you have other issues.
RE: 3.0 306 v6 - bradh511 - 29-09-2013
Hi again. heater get hot ... Just seems like it gets to hot to quick so am gessing it just fans so will fit some and take her for a test run
RE: 3.0 306 v6 - Daniel306 - 29-09-2013
How old is your radiator? There crap even new
RE: 3.0 306 v6 - Tom - 29-09-2013
Does the rad get hot? Could be shagged stat.
RE: 3.0 306 v6 - Piggy - 16-10-2013
"hot"...how hot??
as already asked...does the rad get hot....ie is the stat opening and rad flowing?
what fans are fitted?