+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: URGENT: Offside Wishbone for GTi6 (/showthread.php?tid=17506)
URGENT: Offside Wishbone for GTi6 - MissTap_GTI6 - 21-09-2013
Hi,
Has anyone got an offside wishbone kicking about?
It has to be for a GTi.
I need one ASAP please.
Thank you,
Eli x
RE: URGENT: Offside Wishbone for GTi6 - Connor - 21-09-2013
Has to be for a gti? Why? You should just ask for 16 or 18mm
RE: URGENT: Offside Wishbone for GTi6 - Scott - 21-09-2013
It's a phase 2 as well, could be either
I'm willing to bet it's a 16mm though!
RE: URGENT: Offside Wishbone for GTi6 - Mattcheese31 - 21-09-2013
(21-09-2013, 03:40 PM)Connor Wrote: Has to be for a gti? Why? You should just ask for 16 or 18mm
yeah i think they're same tbh . . . . .
RE: URGENT: Offside Wishbone for GTi6 - ginge191 - 21-09-2013
Well i've bought the ball joint from ECP under the registration and was specified with/without PAS i believe. Visually it seems to match quite well, but than again, i'm looking at 2mm
Re: URGENT: Offside Wishbone for GTi6 - vlj - 21-09-2013
You can get the old one out, just
With great difficulty.
RE: URGENT: Offside Wishbone for GTi6 - Niall - 21-09-2013
If you have got a non pas one, you will have positive camber. Have fun with that.
RE: URGENT: Offside Wishbone for GTi6 - ginge191 - 21-09-2013
(21-09-2013, 06:35 PM)Niall Wrote: If you have got a non pas one, you will have positive camber. Have fun with that.
And what's the best way to tell which is a non PAS one?
given the picture Phil has provided - is this a non or PAS wishbone?
Re: URGENT: Offside Wishbone for GTi6 - vlj - 21-09-2013
You need to measure the balljoints, if yours turns out to be 18mm and you put in a 16mm - you are f*cked. Hopefully you find something buddy! Xx
RE: URGENT: Offside Wishbone for GTi6 - ginge191 - 21-09-2013
Why did i leave my vernier on the island
Measuring tape it is!
RE: URGENT: Offside Wishbone for GTi6 - Niall - 21-09-2013
The wishbones are all the same. The difference between non pas and pas ball joints is the length of the plate. The pas plate is longer for more camber.
RE: URGENT: Offside Wishbone for GTi6 - tigerstyle - 22-09-2013
(21-09-2013, 07:02 PM)Niall Wrote: The wishbones are all the same.
Same left and right? After ball joints are removed?
It's quick to measure ball joint size by slipping a spanner over them, no need for verniers.
RE: URGENT: Offside Wishbone for GTi6 - Niall - 22-09-2013
(22-09-2013, 07:00 PM)tigerstyle Wrote:(21-09-2013, 07:02 PM)Niall Wrote: The wishbones are all the same.
Same left and right? After ball joints are removed?
It's quick to measure ball joint size by slipping a spanner over them, no need for verniers.
No not from side to side. I meant across all models of 306.
RE: URGENT: Offside Wishbone for GTi6 - tigerstyle - 22-09-2013
My question was side to side sorry, are they?
And sorry for the off topic!
RE: URGENT: Offside Wishbone for GTi6 - Chris - 22-09-2013
With the p bush removed they are the same side to side.