+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: 306 door loom with 21 wires (/showthread.php?tid=17017)
306 door loom with 21 wires - maguire1992 - 03-09-2013
Anyone able to help me out? In desperate need of these for both doors
Thanks
RE: 306 door loom with 21 wires - Piggy - 03-09-2013
fix it in meantime?
second hand looms could be no better or worse!
Re: RE: 306 door loom with 21 wires - bigtone0777 - 04-09-2013
I'd defo spend a few hours soldering and shrink wrapping your existing ones over fitting second hand ones as the chances are your gonna have the same problem later if not immediately.........either that or but new ones
RE: 306 door loom with 21 wires - Daniel306 - 04-09-2013
Its so much easier just to replace the entire loom
RE: 306 door loom with 21 wires - Piggy - 04-09-2013
(04-09-2013, 06:21 AM)Daniel306 Wrote: Its so much easier just to replace the entire loom
it is if you buy a new loom which are hugely expensive and are still wired too short.
personally I would say even with a new loom, cutting open the boot and soldering in a small length of wire on a couple of broken ones is simpler than doing the entire loom
RE: 306 door loom with 21 wires - maguire1992 - 04-09-2013
The plug is too far gone there's not enough wires there to work with "/
I've found a passenger one on eBay but need a drivers "/
RE: 306 door loom with 21 wires - Piggy - 04-09-2013
what phase is this for??
I got a ph1 drivers loom/plug. been repaired.
RE: 306 door loom with 21 wires - maguire1992 - 04-09-2013
2 but that shouldn't matter
As long as there's 21 pins in it
RE: 306 door loom with 21 wires - Daniel306 - 04-09-2013
(04-09-2013, 06:43 AM)Piggy Wrote:(04-09-2013, 06:21 AM)Daniel306 Wrote: Its so much easier just to replace the entire loom
it is if you buy a new loom which are hugely expensive and are still wired too short.
personally I would say even with a new loom, cutting open the boot and soldering in a small length of wire on a couple of broken ones is simpler than doing the entire loom
Iv done both ways, changing the lot is quicker and far easier than trying to fit a new plug
RE: 306 door loom with 21 wires - maguire1992 - 09-09-2013
Bump have a passenger side just need drivers now
RE: 306 door loom with 21 wires - maguire1992 - 17-09-2013
Bump up
Re: 306 door loom with 21 wires - CJ_Derv - 19-09-2013
I have one il check wires tonight