Can't get my angel eyes/HIDs to work? - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23) +--- Thread: Can't get my angel eyes/HIDs to work? (/showthread.php?tid=16314) |
Can't get my angel eyes/HIDs to work? - rtha6551 - 09-08-2013 Plugged the grey plug into the socket, and the indicator plug in but I get an odd pattern of lights? Drivers side: Sidelights: halo rings, 3 small yellow lights go on as expected along with the innermost smallest projector lens Dipped beam: nothing changes from the sidelights setting but there is an intermittent fizzing noise coming from the light unit and I can't tell where it's coming from, no visible causes of shorts from what I can see Main beam: same as sidelights but the non projector high beam does come on Passenger side: Sidelights: nothing except the innermost lens lights up Dipped beam: the dipped projector lens lights up but nothing else apart from the innermost sidelight lens Main beam: the non projector lens lights up along with the others Really have no idea what's going on, all connections are secure and tight but :S Thanks RE: Can't get my angel eyes/HIDs to work? - Matt - 09-08-2013 Any pics if the wiring, it's a DIY job to get the halo working so they might have wired it wrong RE: Can't get my angel eyes/HIDs to work? - Just Sean - 09-08-2013 They came of my car. Worked fine for me.. What phase is your car? RE: Can't get my angel eyes/HIDs to work? - Piggy - 09-08-2013 sounds like bad connections Can't get my angel eyes/HIDs to work? - rtha6551 - 09-08-2013 (09-08-2013, 01:05 PM)Matt Wrote: Any pics if the wiring, it's a DIY job to get the halo working so they might have wired it wrong Ill get some pictures after dinner as Sean said they worked fine for him, they came off his car :p Mines a ph3 hdi, same as his (09-08-2013, 01:14 PM)Piggy Wrote: sounds like bad connections I was going to clean the connection sockets would that be any good? RE: Can't get my angel eyes/HIDs to work? - londondan86 - 15-08-2013 Have you run 100w bulbs before? |