+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Front half leathers, panels, spacers, bosch and more. (/showthread.php?tid=15922)
Front half leathers, panels, spacers, bosch and more. - Pompey306mark - 27-07-2013
So with the new engine bought, I can strip down all my old stuff.
20mm spacers pair £25
17mm spacers pair £20
Two sets of 5 door side skirts with rubber £30 each.
Phase 1 dials with metal monkey plates black with blue colouring and heater plate: £60
Phase 3 rear lights with Lexus looms, straight plug to phase 1: £10
I also have a omp phase 1 boss: £20
h - rd070707 - 27-07-2013
Pairs of spacers or all 4?
A - bigcheez2k3 - 27-07-2013
What condition are the wheels in? For some reason I have it in my head that they've been kerbed?
Wanted them when Dum-Dum first sold them but missed out to Kwik by about 30 minutes :/
I was having the same reply issue, your title is really long and once you press reply it adds 'RE:' to the start making it even longer.
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 27-07-2013
yea they are kurbed but nothing that cant be repaired.
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - rd070707 - 27-07-2013
answer my question lol. And do they come with bolts
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 27-07-2013
If you look in the first post I did as I could not reply.
Only pairs, no bolts as I run studs.
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 31-07-2013
Guys forgot to mention the td04 does not come with the actuator or bracket.
Re: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Tyronnster - 15-08-2013
Bosch sold?
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 15-08-2013
Not removed off the car yet.
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 22-08-2013
Sold a few bits, so just updating.
I think the 15mm spacers are more like 17/18mm spacers which is a bit random.
RE: Td04 with T2 conversation plates, 10mm Bosch setup, 20mm spacers, hdi con rods - Pompey306mark - 08-09-2013
So finally stripped down the old engine.
Head: £20
Starter: 20
T25 bolt on with manifold and oil line and egt sensor and wire: £150
10mm Bosch with injector and lines: £120 (not for sale until I know the new engine works) but happy to hold.
5 door shell doors: smoothed strips, de locked fronts, de handled rears, tinted rears, all 4 have dyna-mat sound deadening. Windows all in working order.
These are phase 1 doors but fronts wired for phase 3 switches: £200
Front half leather seats passenger and driver side: £50
Xsara front mount manifold: £40
Plus all the stuff from the first post.