+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Ph3 bump strips on ph2 (/showthread.php?tid=15414)
Ph3 bump strips on ph2 - Aaron _d95 - 10-07-2013
Do phase 3 bump strips fit a phase 2. I seen some today and they are rounded unlike the flat phase 2 ones. They also look a little narrower not sure if its because they're curved or actually narrower. Are they a direct replacement. I can't imagine peugeot redesigning all the crease part down the side of the car where the bump strip meets just to fit a curved one.
RE: Ph3 bump strips on ph2 - underground375 - 10-07-2013
I've seen a few ph1 with the later ph3 bump strips, and they don't look rite as the ph1 has a indented line where the bottom of the earlier bump strip ends, looks totally out of place, so I would imagen the ph2 is the same. Some others on here may have a better answer.
Ph3 bump strips on ph2 - Aaron _d95 - 10-07-2013
(10-07-2013, 10:40 PM)underground375 Wrote: I've seen a few ph1 with the later ph3 bump strips, and they don't look rite as the ph1 has a indented line where the bottom of the earlier bump strip ends, looks totally out of place, so I would imagen the ph2 is the same. Some others on here may have a better answer.
That's what I was wondering about that indented line.
RE: Ph3 bump strips on ph2 - 4WayDiablo - 10-07-2013
do it, i cant say ive ever noticed it looking odd when ive seen a ph2 with ph3 strips
Ph3 bump strips on ph2 - Aaron _d95 - 10-07-2013
(10-07-2013, 11:11 PM)4WayDiablo Wrote: do it, i cant say ive ever noticed it looking odd when ive seen a ph2 with ph3 strips
Ill try one piece of it on tomorrow and post how it looks.
RE: Ph3 bump strips on ph2 - underground375 - 11-07-2013
Yeah be good to see a close up picture of it,
RE: Ph3 bump strips on ph2 - puglove - 11-07-2013
Yeah they are direct fit no problems. No line on the underside. I have ph3s on my ph2 6 sp first hand experience.
The wing strip dosnt line up 100% but isnt noticable
Ph3 bump strips on ph2 - Aaron _d95 - 11-07-2013
(11-07-2013, 09:32 AM)puglove Wrote: Yeah they are direct fit no problems. No line on the underside. I have ph3s on my ph2 6 sp first hand experience.
The wing strip dosnt line up 100% but isnt noticable
I test fitted the wing one and realised that so didn't want to pull the rest off and break the clips to find out they didn't fit either and end up with none.
Thanks ill put them on then and try and work something out with the wing one.
RE: Ph3 bump strips on ph2 - puglove - 11-07-2013
I found that if you cut the clip holders off the back of the strip the "no more nails" the clips on the back of the strip in the correct place works well lol