+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Help recommend me some bonnet pins (/showthread.php?tid=14967)
Help recommend me some bonnet pins - ginge191 - 25-06-2013
As me and vlj had the fright the other day.
It seems after i hit the deer, the bonnet has take a small ding in the corner; cutting a long story short; either corner of the bonnet shakes and lifts at 70-80.
I'd like something as cheap as possible, and something which is fairly discrete and not too gash looking. The bonnet is red, so perhaps a red catch to blend in?
I'm looking at the generic ebay jobbies, but unsure what else people have used/experienced?
RE: Help recommend me some bonnet pins - Grant - 25-06-2013
Aerocatch
![[Image: yes.gif]](http://306oc.co.uk/forum/images/smilies/Skype/yes.gif)
A bit more pricey but spot on IMO
RE: Help recommend me some bonnet pins - Matt - 25-06-2013
I've got the cheap Chinese one. They look like they do the job. Lightweight and pretty good
RE: Help recommend me some bonnet pins - ginge191 - 25-06-2013
(25-06-2013, 08:56 PM)Grant Wrote: Aerocatch
A bit more pricey but spot on IMO
Way too much mate im afraid. Not really wanting to spend £40 on locking pins
(25-06-2013, 08:58 PM)Matt Wrote: I've got the cheap Chinese one. They look like they do the job. Lightweight and pretty good
Just the generic ebay jobbies?
RE: Help recommend me some bonnet pins - Jenkosowls - 25-06-2013
Anything as long as its not aluminum pins
RE: Help recommend me some bonnet pins - Matt - 25-06-2013
Yep, £5 Chinese shit lol. L
RE: Help recommend me some bonnet pins - samass - 25-06-2013
Ones like mjne? Were like 8 quid I think
RE: Help recommend me some bonnet pins - ginge191 - 25-06-2013
(25-06-2013, 09:15 PM)samass Wrote: Ones like mjne? Were like 8 quid I think
Yeh, those round ones would be ideal, in red or black, but I can only fin the rectangular catches hmm..
RE: Help recommend me some bonnet pins - samass - 25-06-2013
Check your whatsapp
RE: Help recommend me some bonnet pins - ginge191 - 25-06-2013
RE: Help recommend me some bonnet pins - ozonehostile - 25-06-2013
the round locking ones are good, nice and flush to the bonnet with the added security
RE: Help recommend me some bonnet pins - ginge191 - 26-06-2013
with these
http://www.ebay.co.uk/itm/Black-Alloy-Bonnet-Hood-Pin-Lock-Kit-Down-Hood-Locks-Pins-fit-ALL-Racing-Speed-/290937112643?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item43bd340843
What sort of protection/flaws are there in comparison with the round ones. I'm liking the look of the black ones.
RE: Help recommend me some bonnet pins - Poodle - 26-06-2013
Those are ally pins dude.
EDIT: No they're not, the retards have just described them as alloy in the title, what do they think normal steel is then?
RE: Help recommend me some bonnet pins - ginge191 - 26-06-2013
..better?
http://www.ebay.co.uk/itm/JJC-Competition-Alloy-Bonnet-Pins-Black-Boot-Fastener-Sliding-Anodised-Pins-Kit-/280949800256?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4169e9bd40
RE: Help recommend me some bonnet pins - Matt - 26-06-2013
What's so wrong with ally?
RE: Help recommend me some bonnet pins - Dum-Dum - 26-06-2013
Just a point to make, d'ont know how friendly your local MOT tester and police are but the "sticky outy" bonnet pins are a bit of a grey area on a road car with regards to sharp projections capable of causing injury (a C&U offence)
RE: Help recommend me some bonnet pins - ginge191 - 26-06-2013
(26-06-2013, 09:28 AM)Matt Wrote: What's so wrong with ally?
This?
Perhaps they're likely to bend/snap being a weaker material?
(26-06-2013, 09:29 AM)Dum-Dum Wrote: Just a point to make, d'ont know how friendly your local MOT tester and police are but the "sticky outy" bonnet pins are a bit of a grey area on a road car with regards to sharp projections capable of causing injury (a C&U offence)
Ah good point.
I've never been stopped by the police round here; given the condition of the 205 at the moment, but i suppose i could remove them come MOT time..
RE: Help recommend me some bonnet pins - Dum-Dum - 26-06-2013
Here is an appropriate extract from the The Road Vehicles (Construction and Use) Regulations 1986
18 External projections
1. The vehicle shall not be fitted with any mascot, emblem or other ornamental object unless it complies with the requirements of regulation 53 of the Construction and Use Regulations.
2. The radius of curvature of all hard parts on or protruding from the external surface of the vehicle and which can be contacted by a sphere of 100 mm diameter, shall be not less than 2.5 mm.
Mascots
53.—(1) Subject to paragraph (2), no mascot, emblem or other ornamental object shall be carried by a motor vehicle first used on or after 1st October 1937 in any position where it is likely to strike any person with whom the vehicle may collide unless the mascot is not liable to cause injury to such person by reason of any projection thereon.
(2) Instead of complying with the requirements of paragraph (1) a vehicle may comply with Community Directive 74/483 or 79/488 or ECE Regulation 26.01.
Im sure theres more on protrusions in other places but i cant (CBA) find them at the moment. A quick google finds people who have had a fine and points for bonnet pins too.
Think id go for aero catches as they are £40 and the fine is £60
RE: Help recommend me some bonnet pins - samass - 26-06-2013
Yeah a copper didn't take to kindly to my bonnet pins, but that was the least of his worries so all was good, recess them and you'll be golden
RE: Help recommend me some bonnet pins - ozonehostile - 26-06-2013
ive had questions about my bonnet pins from police, no fines or anything, just the usual "next time you wont be so lucky" im changing for flush locking pins anyway, don't want to hassle of it again