+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: td04 advice (/showthread.php?tid=11078)
td04 advice - cranney - 19-02-2013
ok so planning fitting a tdo4 so need some advice where is cheapest for adaptor plates and what exactly do i need to do with oil lines i already know that i should blank the coolant lines any help would be good as i am driving with very little boost due to my garret turbo waste gate being jammed open
td04 advice - Jake - 19-02-2013
(19-02-2013, 01:21 PM)cranney Wrote: ok so planning fitting a tdo4 so need some advice where is cheapest for adaptor plates and what exactly do i need to do with oil lines i already know that i should blank the coolant lines any help would be good as i am driving with very little boost due to my garret turbo waste gate being jammed open
Dude seriously.... Search ...
There is people on here who sell both the adaptor plates and the oil lines.
And don't worry about the coolant lines. Just leave them, no need to block them off.
RE: td04 advice - David - 19-02-2013
Those turbos are ok and cheap but it's worth looking into different turbos and being different
Re: td04 advice - CJ_Derv - 19-02-2013
Im doing adaptor plates £65 posted T2 and hopefully getting K14 this week
RE: td04 advice - Chris_90 - 19-02-2013
i got a td04 for sale with oil line and k14 manifold and elbow just need adapter plates of cj
RE: td04 advice - bigcheez2k3 - 19-02-2013
(19-02-2013, 01:36 PM)Jake Wrote:(19-02-2013, 01:21 PM)cranney Wrote: ok so planning fitting a tdo4 so need some advice where is cheapest for adaptor plates and what exactly do i need to do with oil lines i already know that i should blank the coolant lines any help would be good as i am driving with very little boost due to my garret turbo waste gate being jammed open
Dude seriously.... Search ...
There is people on here who sell both the adaptor plates and the oil lines.
And don't worry about the coolant lines. Just leave them, no need to block them off.
This. I'm currently getting one put on my car and I took an hour or two, searched for 'TD04' on here and read as much as possible.
I did ask a couple questions but that was just for things that hadn't been mentioned.