+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: k14 out let size?? (/showthread.php?tid=11050)
k14 out let size?? - Chris_90 - 18-02-2013
As above any one no what size the out let is on the k14 so I can get an adapter to fit my intercooler pipe work
RE: k14 out let size?? - Mattcheese31 - 18-02-2013
i would guess 2" mate . .
RE: k14 out let size?? - Chris_90 - 18-02-2013
Need to no for certin so I can get right adapter be nice if it is 2inch cos should have one in shed that will do it but I thought it would be smaller than 2inch
RE: k14 out let size?? - Mattcheese31 - 18-02-2013
(18-02-2013, 09:09 PM)Chris_90 Wrote: Need to no for certin so I can get right adapter be nice if it is 2inch cos should have one in shed that will do it but I thought it would be smaller than 2inch
just going on the other end of the pipe that joins to intercooler, that's 2" iirc . .which i may not . .
RE: k14 out let size?? - Jonny81191 - 18-02-2013
K03 is 41mm IIRC, I guess it'll be similar so 50mm sounds about right, it'd probably clamp down ok anyway if you used a good quality clamp.
k14 out let size?? - Jtrigga - 18-02-2013
51mm fits fine with a jubilee.