+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Brake bias valve thingy (/showthread.php?tid=10289)
Brake bias valve thingy - Bananalad - 29-01-2013
When your freeing these up is the spring meant to be loose? Falling from side to side? Or is there meant to be another spring to take up the slack? Thanks
RE: Brake bias valve thingy - puglove - 30-01-2013
The spring should only be loose when jacked up in my experience.
RE: Brake bias valve thingy - Grant - 30-01-2013
(30-01-2013, 06:55 AM)puglove Wrote: The spring should only be loose when jacked up in my experience.
???
RE: Brake bias valve thingy - Niall - 30-01-2013
(30-01-2013, 08:01 AM)Grant Wrote:(30-01-2013, 06:55 AM)puglove Wrote: The spring should only be loose when jacked up in my experience.
???
It's pretty clear....
When the cars on the ground, the spring should be under load. When jacked up, it shouldn't be. Simples.
RE: Brake bias valve thingy - puglove - 30-01-2013
Yeah grant!!!!!! What niall said