+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Help with heaters (/showthread.php?tid=10250)
Help with heaters - David - 28-01-2013
I replaced one of my coolant pipes at the weekend and in the end I changed all the coolant. Put the car back together fine and with no leaking coolant point so I'm happy there and I bled the coolant system fine at the two bleed points. Got in the car early this morning and I could here it blowing but when I change the blower speed I can only feel it very very slightly. The blower motor seems fine?
Any ideas people?
RE: Help with heaters - strictly_perv - 28-01-2013
That's odd, the blower speed isn't affected by the coolant. Have you checked it's not being blocked by anything?
RE: Help with heaters - David - 28-01-2013
Yeah it all looks fine to me :/ I'm really stumped here
Help with heaters - Parksy87 - 28-01-2013
Resistor? Or vent position flaps not moving properly?
RE: Help with heaters - David - 28-01-2013
An nothing to do with the flaps as when I change to windscreen or feet there is still nothing there.
RE: Help with heaters - David - 28-01-2013
Any ideas?
RE: Help with heaters - Just Sean - 28-01-2013
Might just be coincedental mate. Take the motor out and clean it up and give it some wd40. Might help free it up a bot
RE: Help with heaters - ozonehostile - 28-01-2013
Yeah Id say you have an issue with the motor. Get it out. Clean it
RE: Help with heaters - Eeyore - 28-01-2013
Yeh check the motor.
RE: Help with heaters - David - 28-01-2013
Fixed
was nothing to do with the blower motor it was the little flap which allows the air into the blower motor.
RE: Help with heaters - ozonehostile - 28-01-2013
(28-01-2013, 01:00 PM)David Wrote: An nothing to do with the flaps
riiiiiiiggggghhhhhhhttttttt
Help with heaters - Parksy87 - 30-01-2013
Ooooops