+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: SALE INTEREST!! TD04 Adaptor plates (/showthread.php?tid=5510)
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 28-11-2012
Sorry for delay martyn, Ive T2 left atm not got K14 atm and waiting on manifold plates to be retapped batch ive got sat here drilled wrong
RE: SALE INTEREST!! TD04 Adaptor plates - martyn92 - 13-12-2012
Im interested in the manifold/turbo plate. I will do the hotside my self
And how did you seal these plates? are they machined flat already?
edit: forgot im using the other shaped manifold
the holes look really similar to gt15, does the gt15 definitely not fit onto the k14/t2 manifold?
The manifolds are angled differntly when fitting as stock but as long as the holes line up then the plates should work?
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 13-12-2012
To be honest i havent a clue about the GT15 if i were you if your making the hotside yourself id make the manifold one too while your at it as i dont think this is right for your application tbh
RE: SALE INTEREST!! TD04 Adaptor plates - Piggy - 23-12-2012
still seems pricey this...or am I just tight?
I gota low millage great condition 2005 td04 for £50inc postage....but 65 to fit it and its not a straight fit as one hole still needs drilling?!
local firm can do one off 8mm plates for a tenner...Im going there...
SALE INTEREST!! TD04 Adaptor plates - Jake - 23-12-2012
(23-12-2012, 02:15 AM)Piggy1987 Wrote: still seems pricey this...or am I just tight?
I gota low millage great condition 2005 td04 for £50inc postage....but 65 to fit it and its not a straight fit as one hole still needs drilling?!
local firm can do one off 8mm plates for a tenner...Im going there...
Custom made plates for a tenner ?
Surely they would lose lots of money making these?
Re: RE: SALE INTEREST!! TD04 Adaptor plates - Dan! - 23-12-2012
(23-12-2012, 02:15 AM)Piggy1987 Wrote: still seems pricey this...or am I just tight?
I gota low millage great condition 2005 td04 for £50inc postage....but 65 to fit it and its not a straight fit as one hole still needs drilling?!
local firm can do one off 8mm plates for a tenner...Im going there...
(23-12-2012, 02:15 AM)Piggy1987 Wrote: ...or am I just tight?
Yeah, that.
Get some pics up of the plates for a tenner when they're done - I can't wait to see what the apprentice steel worker can knock up in his lunch hour. And if you can some how get around having to drill that extra hole in the manifold then that'd be great, when can you teach me witchcraft too?
RE: SALE INTEREST!! TD04 Adaptor plates - Piggy - 23-12-2012
...just saying seems steep
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 02-01-2013
these are laser cut drilled and tapped and supplied with studs, the K14 are a perfect fit as the exhaust elbow doesnt foul a bolt, please post these ones for a tenner i wanted these to look as if the turbo was made for the car rather than a lash up setup like ive seen,
sold plenty so you just must be a tight arse!! looking forward to seeing your plates haha
SALE INTEREST!! TD04 Adaptor plates - dturbopeck - 07-01-2013
Have you got any of these for the the T2 left, as I've come across a very cheap tdo4, cheers
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 07-01-2013
Yes ive got the hotside plate just need to get some manifold ones as he drilled these iv got here wrong but will ask him to get some sorted buddy as get back to you asap
CJ
SALE INTEREST!! TD04 Adaptor plates - dturbopeck - 07-01-2013
Cheers bud
RE: SALE INTEREST!! TD04 Adaptor plates - Dave - 07-01-2013
To be honest, two square plates, with correct lolcated flow hole and bolt holes would be adequate, as i've seen some people do before (no need to cut the entire pattern of the outside of the flange out), but for a pure application to get an MHI turbo to fit, £65 is easily reasonable - they sell because there is a need for them. It takes hours to cut one out using chain drilling, and then filing it all out, which i've done before. But personally depends if you wanna f*ck about like that with a hand drill, vice, and file for 6 hours making them both, and getting the patterns for them, and lining them up. Sometimes its just easier to buy something ready made, and bolt it on. I bet they cost alot less than £65 to make, but they are still worth it if you need them, and dont have the time/facilities/skills/inclination to make them.
This, with the braided hoses available, and cheap £40 turbo off ebay can see a td04 mounted to an xud for less than £130!
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 07-01-2013
Laser cutting is the main cost dave just so it looks like its made for it, hence when i look down thw back of my engine it looks oem
RE: SALE INTEREST!! TD04 Adaptor plates - GP123 - 13-01-2013
Bump, I will be interested in a set of plates towards the end of the week. Have you got any K14 left? Send me a PM, Thanks.
SALE INTEREST!! TD04 Adaptor plates - dturbopeck - 14-01-2013
Any news on these yet?
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 22-01-2013
Just messaged the guy going to try get some made up asap as i need manifold plates where the threaded hole for the TD04 and larger holes for nut and bolts through manifold and some K14s made asap
Ive not forgot guys just had a lot on
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 22-01-2013
Spoke to him today and hes going to try and get some made up for the end of week guys
SALE INTEREST!! TD04 Adaptor plates - dturbopeck - 22-01-2013
Cheers,
RE: SALE INTEREST!! TD04 Adaptor plates - GP123 - 22-01-2013
Good news. Thanks! Keep updating this thread..
. I want K14 ones.
RE: SALE INTEREST!! TD04 Adaptor plates - GP123 - 28-01-2013
Bump..
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 29-01-2013
Im just teying to find templates for k14 cant remember the stud positions for elbow anyone got one they havent used that could do a template will have T2 ready in few days
SALE INTEREST!! TD04 Adaptor plates - dturbopeck - 29-01-2013
I will have a t2 plates as soon as there done, will even pay u up front if it makes dispatch faster, really could do with them by the weekend if poss
RE: SALE INTEREST!! TD04 Adaptor plates - bigcheez2k3 - 03-02-2013
Much going on with these? Looking at a TD04 so will be looking for one of these too.
RE: SALE INTEREST!! TD04 Adaptor plates - bayley - 03-02-2013
is it just me or does piggy1987 bitch about everything,lol.some people make me laugh.
RE: SALE INTEREST!! TD04 Adaptor plates - Chris_90 - 04-02-2013
Im after a set for k14 pm'd you
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 05-02-2013
Right guys im taking the K14 turbo to gym to give my guy for the templete for K14 hotside as entioned earlier the templet got damaged so need holes linging up again. but hopefully have some K14 this week
Ive got a few T2 ready to go sent a few pms regarding this but if you want a t2 let me know and can get out asap
going to get as many as i can made up as people are showing interest in these again
(03-02-2013, 09:13 PM)bayley Wrote: is it just me or does piggy1987 bitch about everything,lol.some people make me laugh.
Totally agree with you TBH, but il leave it at that
Ive provided plenty of these plates at what i see a fair price for a straight fit K14 is no messing and not being funny if your not capable of drilling one hole and either tapping it or putting a bolt through, this product is not for you
and as Dan has also mentioned weve not seen pictures of these £10 quid plates either lol
oh and just for piggy the reason you have to drill the hotside is so you get the centre of the elbow lined up central with the Turbine its the only way as you dont want the elbow off centre as it will reduce flow
but jus sayin
RE: SALE INTEREST!! TD04 Adaptor plates - David - 15-02-2013
Any left mate?
RE: SALE INTEREST!! TD04 Adaptor plates - Chris_90 - 15-02-2013
(15-02-2013, 10:52 AM)David Wrote: Any left mate?
You will have to get in the que
lol im still waiting
RE: SALE INTEREST!! TD04 Adaptor plates - CJ_Derv - 15-02-2013
Im just waiting back on my man David on k14 but have a few T2 spare
RE: SALE INTEREST!! TD04 Adaptor plates - GP123 - 20-02-2013
Bump!!! K14 update?