+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Toms306s Project - Fodge! (/showthread.php?tid=2202)
Re: Toms306s Project - Fodge! - THE_Liam - 29-03-2012
Toms306 Wrote:So it does half the mpg of mine....I'd say that's thirsty!
It isn't for what it is though Tom, 30 mpg average in a powerful, turbocharged petrol is pretty good. Plus, a Golf TDI in the same condition as my Octavia would have been about £1000-£1500 more, and that buys a lot of petrol
You can get 45 mpg on a run and 25-30 mpg in town from these even with a re-map to 220 bhp, compare that to a mk1 Impreza WRX with about the same power and it won't look thirsty then, my mate gets 28 mpg ON A RUN :o
Re: Toms306s Project - Fodge! - mark_airey - 29-03-2012
THE_Liam Wrote:It isn't for what it is though Tom, 30 mpg average in a powerful, turbocharged petrol is pretty good. Plus, a Golf TDI in the same condition as my Octavia would have been about £1000-£1500 more, and that buys a lot of petrol
You can get 45 mpg on a run and 25-30 mpg in town from these even with a re-map to 220 bhp, compare that to a mk1 Impreza WRX with about the same power and it won't look thirsty then, my mate gets 28 mpg ON A RUN :o
You can get an Impreza into single figures if you put your foot down
that makes yours look amazing, although the Impreza should be around 240 BHP if it is standard and its not broken 
Toms306s Project - Fodge! - THE_Liam - 29-03-2012
mark_airey Wrote:You can get an Impreza into single figures if you put your foot down
I can't believe how bad they are on juice, I think it's the boxer engine. My dad had a Legacy 2.2 non-turbo, and that got about 20 mpg average...
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Soooo.....quite enjoying the new power and mpgz!
The dubgen meet was surpisingly good last night and even had a play with a 1.8t on the way there lol.....did get lost in martlesham on the way back though. 
Anyway, just wondering if the turbo 'normally' allows any oil into the boost hoses on a turbo engine? Basically because I have a small boost leak (one of the few jubilees I had to use lol, will get another T clamp soon) and theres oil coming out of it...BUT I have a catch tank from the crank breather and wasn't aware of anything else dumping oil into the intake?? :think:
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
Could be slightly worn seals inside the turbo allowing oil from it's main feed to seep out?
If the car has a fair few miles then it's just a sign of the turbo getting older.
Re: Toms306s Project - Fodge! - Dan! - 30-03-2012
Turbo's f*cked.
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Toby Wrote:Could be slightly worn seals inside the turbo allowing oil from it's main feed to seep out?
If the car has a fair few miles then it's just a sign of the turbo getting older.
If it is just age then I'm not too bothered as it's on 130k and I'm not changing the turbo...yet.
But if theres anything else that causes it then I'd like to stop it lol.
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Dan! Wrote:Turbo's f*cked.
O rly
There was a lot more oil in the silver one lol :oops:And what do you mean by f*cked...cos it still boosts well and sounds ace.....it's expected to be worn a bit by now lol.....so would you be after 10 years and 130k miles.
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
Dan! Wrote:Turbo's f*cked.
Always the drama queen eh
Where's that old Norfolk spirit of getting ones value for money? Run it 'til it stops completely, then run it some more should be your motto
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Toby Wrote:Dan! Wrote:Turbo's f*cked.
Always the drama queen eh
Where's that old Norfolk spirit of getting ones value for money? Run it 'til it stops completely, then run it some more should be your motto
He's just jealous I have the twice the power of the Bora...........and climatronic!
Jks....I'd love the leathers from the bora!
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
But Dan's got more stance than... This man!
![[Image: horse-stance04.jpg]](http://www.shaolin.org/images-3/general-5/horse-stance04.jpg)
Re: Toms306s Project - Fodge! - Dan! - 30-03-2012
Hehe, just a bit of scaremongering, sorry Tom
If you have put an oil catch tank on, and fitted it correctly, then the only oil in there will be what was left in there from before from the oil breather (did you clean the intake pipes out?) or leaking from the turbo seals. Id say its probably more likely to be left over oil breather stuff, but theres still an obvious posibility its turbo seals. If you can get to the turbo inlet easy enough then check the shaft for any play 
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Toby Wrote:But Dan's got more stance than... This man!
True....I've seen the state his arches are in!!
I did feel a bit like a tractor at the meet yesterday though, musta been the only one on standard suspension!
There was some awesome air ride there too... :think:
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
Dan! Wrote:If you have put an oil catch tank on, and fitted it correctly
We modify 306's. Things are never done correctly.. Only cheaply
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Dan! Wrote:Hehe, just a bit of scaremongering, sorry Tom
I cleaned out what I could get too which was all pipes that I didnt replace except the red turbo pipe...and not inside the turbo, cant be much stuck in the turbo though surely? :think:
I expect the turbo seals are leaking a bit tbh, as said its done a fair few miles now! The turbo inlet is easy enough to reach...but I couldn't get the bloody inlet pipe clip off! :roll:
Its got one of them clips you have to squeeze together like on the airbox but not enough space for a tool to squeeze it together!
hock:
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Toby Wrote:Dan! Wrote:If you have put an oil catch tank on, and fitted it correctly
We modify 306's. Things are never done correctly.. Only cheaply
Well tbf it's not done 'properly yet
Thats washing machine waste hose, a squash bottle and some masking tape btw. ![[Image: 4-3E2A389E-1012133-480-1.jpg]](http://i796.photobucket.com/albums/yy247/Toms306_photos/4-3E2A389E-1012133-480-1.jpg)
However I have the catch tank and the pipe now, just need some time to put it on!
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
Toms306 Wrote:Toby Wrote:We modify 306's. Things are never done correctly.. Only cheaply
Thats washing machine waste hose, a squash bottle and some masking tape btw.
Just get a marker pen and write 'Greddy' on the side of them.. People will never know
Re: Toms306s Project - Fodge! - Scott - 30-03-2012
Tom, I don't want to have to keep merging your double posts, please choose your quote, copy it and edit your original post, or learn to press quote, then in full editor select the second post you wanted to quote.
Otherwise I'll just start deleting both posts whenever I see it
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Oops, will try not to do that in future Scott, sorry.
Re: Toms306s Project - Fodge! - Toby - 30-03-2012
Scott: Clamping down on spam since 2007.
Re: Toms306s Project - Fodge! - Toms306 - 30-03-2012
Toby Wrote:Scott: Clamping down on spam since 2007.
How can it be spam in my own thread
Re: Toms306s Project - Fodge! - Scott - 30-03-2012
It's okay mate Thanks
Re: Toms306s Project - Fodge! - Toms306 - 06-04-2012
Quick update.....fitted the towbar today......but this ones detachable with no visible signs of it when removed (unless you lay under the bumper lol...)
Start....
[attachment=4]
Cars naked :o
[attachment=5]
All done
[attachment=3]
When removed, the towball thing fits in the spare wheel tool carrier and the plug folds up under the bumper.....so its handy but hidden.
Also, took some beading pics the other day....
[attachment=2]
[attachment=1]
[attachment=0]
Re: Toms306s Project - Fodge! - mark_airey - 06-04-2012
Good practice there Tom working on a car supported by a jack :clap:
Looks like a nice tidy job though, even better if its totally hidden when not in use
and you didn't get killed by the car falling which has to be a bonus
Re: Toms306s Project - Fodge! - 4WayDiablo - 06-04-2012
never heard of axle stands? lol atleast trust something solid
Re: Toms306s Project - Fodge! - Toms306 - 06-04-2012
There's no where on a mk4 to put the jack or stands except that one point! It's the same on the fabia, stupid design tbh.
The other side was supported by a stand and the oem jack BTW.
Re: Toms306s Project - Fodge! - Dan! - 06-04-2012
What's wrong with the rear beam?
Re: Toms306s Project - Fodge! - Toms306 - 06-04-2012
Dan! Wrote:What's wrong with the rear beam?
It's not a 306.....
The beam on the golf doesn't look all that strong to me, and on briskoda it says that you shouldn't support the car on the beam :?
Re: Toms306s Project - Fodge! - Curt - 06-04-2012
Jacking on the middle of the beam isn't advisable, but what's wrong with one each side? I do have some experience in this area as mine is the same before you inevitably argue...
Re: Toms306s Project - Fodge! - mark_airey - 06-04-2012
Curt Wrote:Jacking on the middle of the beam isn't advisable, but what's wrong with one each side? I do have some experience in this area as mine is the same before you inevitably argue...
........................
...........................