+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: HDi Clutch Change (/showthread.php?tid=4919)
HDi Clutch Change - kentiiboii - 06-09-2012
(04-09-2012, 06:23 PM)Toms306 Wrote: Me sarcastic? Nahhhh.
Seriously though, well done.....no idea how long its taken us now, probably 6 weeks lol.
We got the bottom bolt then, wo just the higher up one to find....hmm....
All our bolts are out we're just struggling to separate the gear box. Defferntly thrust bearing gone as we pulling plastic out. Just hoping there's no damage to gear box.
RE: HDi Clutch Change - samass - 06-09-2012
dont forget to remove the clutch fork arm pin before you pull the box off
RE: HDi Clutch Change - Toms306 - 06-09-2012
That doesn't apply to HDis apparently.
And I've no idea Kent, we havent got any further due to my car being a pile of turd.
RE: HDi Clutch Change - Danny2009 - 06-09-2012
Still haven't done this yet come on lads!
RE: HDi Clutch Change - Toms306 - 06-09-2012
(06-09-2012, 01:43 PM)Danny2009 Wrote: Still haven't done this yet come on lads!
Could've finished it yesterday if my car wasn't a reliable VW....
HDi Clutch Change - kentiiboii - 06-09-2012
Just got the get the spleen off. Just goin to buy a stud extractor. Think we just going to get the box off fit clutch and call it a day today.
RE: HDi Clutch Change - Toms306 - 06-09-2012
(06-09-2012, 04:25 PM)kentiiboii Wrote: Just got the get the spleen off. Just goin to buy a stud extractor. Think we just going to get the box off fit clutch and call it a day today.
The spleen!?
And yeah, you'll never get it out without a stud remover lol, was difficult even with it!
HDi Clutch Change - kentiiboii - 06-09-2012
There we go clutch it out. And the thrust bearing is abliterated!
RE: HDi Clutch Change - Toms306 - 06-09-2012
Oops, think that's f*cked lol.
RE: HDi Clutch Change - Mr Whippy - 06-09-2012
Yeah that looks a bit broken
Dave
HDi Clutch Change - kentiiboii - 06-09-2012
I think the people who changed the clutch last. Just did clutch and pressure plate. Cos they was luk and thrust bearing was Valeo.
So may it be a lesson to all the cheap skates out there. If your takin the box off do the lot together
.
RE: HDi Clutch Change - DaveW - 06-09-2012
Ohh wait till you see what was left of my thrustbearing, when i did my clutch.
HDi Clutch Change - kentiiboii - 06-09-2012
(06-09-2012, 09:21 PM)DaveW Wrote: Ohh wait till you see what was left of my thrustbearing, when i did my clutch.
Got to be bad if your bringing it up :p
RE: HDi Clutch Change - Joe - 07-09-2012
well i did mine in 2 hours 45 mins lol
have done it like 5 times lol only took like 6 hours the first time
RE: HDi Clutch Change - Toms306 - 07-09-2012
(07-09-2012, 07:57 AM)Joe Wrote: well i did mine in 2 hours 45 mins lol
Tbh, it hasn't taken us long......it's just that we're doing it so disjointed and at like an hour a time lol.
HDi Clutch Change - kentiiboii - 07-09-2012
Mine has taken so long because everything is seized! The hub nut we had breaker bar on it and my weight.... It just laughed at us. Didn't budge. So we took the whole hub out.
RE: HDi Clutch Change - Toms306 - 07-09-2012
Hub nuts? Yeah leave those buggers lol, theyre at like 350Nm or something lol.
We popped the shfts out of the box still attached to the hubs....
HDi Clutch Change - kentiiboii - 07-09-2012
We took the hub on the gear box side out. Because we couldn't menouver the gear box out. Because everything shattered i wanted gear box off to make sure it's ok.
RE: HDi Clutch Change - Toms306 - 07-09-2012
(07-09-2012, 08:41 AM)kentiiboii Wrote: We took the hub on the gear box side out. Because we couldn't menouver the gear box out. Because everything shattered i wanted gear box off to make sure it's ok.
We're gonna take the gearbox off.....
We popped the hub off the bottom balljoint so theres plenty of space.
HDi Clutch Change - kentiiboii - 07-09-2012
(07-09-2012, 08:51 AM)Toms306 Wrote:(07-09-2012, 08:41 AM)kentiiboii Wrote: We took the hub on the gear box side out. Because we couldn't menouver the gear box out. Because everything shattered i wanted gear box off to make sure it's ok.
We're gonna take the gearbox off.....
We popped the hub off the bottom balljoint so theres plenty of space.
Yeah we did on one side. Was seized though. Then tried other side didn't wanna go. Everything under my car is seized. Took garage 12 hours to lower beam.
RE: HDi Clutch Change - Toms306 - 07-09-2012
That is the main problem with older cars, well pugs and fords anyway, everything on the golf is easy to undo lol............not that thats much use atm!
HDi Clutch Change - kentiiboii - 07-09-2012
(07-09-2012, 10:00 AM)Toms306 Wrote: That is the main problem with older cars, well pugs and fords anyway, everything on the golf is easy to undo lol............not that thats much use atm!
One day specially now you might stop going on about your golf!
I was ready to start stripping my pug other day and buy a bora :/
RE: HDi Clutch Change - Toms306 - 07-09-2012
Don't buy a Bora, they're like a Golf, but worse!
HDi Clutch Change - kentiiboii - 07-09-2012
Maybe but I really like them
RE: HDi Clutch Change - JamesG - 09-09-2012
(06-09-2012, 08:37 PM)kentiiboii Wrote: I think the people who changed the clutch last. Just did clutch and pressure plate. Cos they was luk and thrust bearing was Valeo.
So may it be a lesson to all the cheap skates out there. If your takin the box off do the lot together
or if you o it make sure you put the bearing in properly! because whoever did it before me put the thrust bearing on the plate back to front! god knows how it worked!
RE: HDi Clutch Change - Toms306 - 09-09-2012
*makes mental note to put the bearing on the right way*
That sounds like the kind of fail I'd do James haha!
HDi Clutch Change - kentiiboii - 09-09-2012
I think i got mine right way. When I go down tomorrow I'll take a picture and send it you dude.
. Just got to get the box and drive shafts back in tomorrow.
RE: HDi Clutch Change - Eeyore - 09-09-2012
If anyone wants to come help feel free! Need this done before next saturday and i need a second person who knows about clutches etc D:
HDi Clutch Change - kentiiboii - 09-09-2012
(09-09-2012, 01:52 PM)SRowell Wrote: If anyone wants to come help feel free! Need this done before next saturday and i need a second person who knows about clutches etc D:
Where are you Rowell?
RE: HDi Clutch Change - Toms306 - 09-09-2012
(09-09-2012, 04:19 PM)kentiiboii Wrote:(09-09-2012, 01:52 PM)SRowell Wrote: If anyone wants to come help feel free! Need this done before next saturday and i need a second person who knows about clutches etc D:
Where are you Rowell?
Woodbridge, Suffolk.
If I find myself a damn car soon we can finish this in a day Sam!
Don't think anyone else will want to come over and help at such short notice but they may do.