+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: rd's moonstone HDi Project - Now Stanced (/showthread.php?tid=6924)
RE: rd's 306 hdi runabout - samass - 06-11-2012
it means you'll need some fettling of the arches to make them fit, as they will stick out farther than the standard wheels
check out www.willtheyfit.com , stadard 306 is et18 i think, and standard tyre size should be 195/55/r15
you'll probably have to run a bit of stretch too id imagine
RE: rd's 306 hdi runabout - rd070707 - 06-11-2012
cheers mate helpful link. so arches will need rolled? what would be a good tyre for the wellers do you think?
RE: rd's 306 hdi runabout - samass - 06-11-2012
you could probably get away with 195/45 or even 195/55, with a little bit of arch work. not really sure bh, this isn't my area of expertise, cwspellowe might have a better idea...
RE: rd's 306 hdi runabout - rd070707 - 14-11-2012
Question....will 14" wellers fit over hdi brakes? eyeing up a set cos i think with mega lows it would look cool
http://www.ebay.co.uk/itm/160917063705?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
RE: rd's 306 hdi runabout - samass - 15-11-2012
possibly. depends on the offest. standard 14" 306 steelies do
RE: rd's 306 hdi runabout - rd070707 - 15-11-2012
see thats the weird thing, my spare wheel is a 14" steelie and it wouldnt fit over the brakes. and i got one from a pug breaker one time off a 306 and it didnt go over lol.
RE: rd's 306 hdi runabout - samass - 15-11-2012
what shape were the holes in them? the ones with round holes dont fit, but the ones with oval holes (see my sig) do
RE: rd's 306 hdi runabout - rd070707 - 15-11-2012
right right lol. well im still to hear back from this guy as to what the offset is. think they would look awesome tho. need the centres bored out too but i can get that sorted
RE: rd's 306 hdi runabout - Oil-burner - 15-11-2012
Offset is worked out from the mating face to the centre of the wheel so ET0 is mating face dead centre of the wheel
Feckin el, you type like demons! Thought I'd replied to the wrong thread! Lol
RE: rd's 306 hdi runabout - rd070707 - 15-11-2012
yeah mate still waiting to hear back lol.
anyway update as more is happening now:
bought the ta coilovers off samass, getting fitted this weekend if they are there on time lol.
![[Image: 33vlxko.jpg]](http://i48.tinypic.com/33vlxko.jpg)
also purchased some low mileage injectors off a berlingo off ebay and picked up another set of half leathers with a good drivers bolster so il be changing that
so future plans are:
-lower roughly 60mm all round
-fit injectors
-sort aux belt tensioner which needs replaced
-fit new seats
-fit new right hand door and wing - these are the two duff bits of bodywork on the car and theres a local moonstone for breaking with good ones on
-decat and possibly stage 1 map after a good service
-oh and roof racks, black masks and black badges lol
RE: rd's 306 hdi runabout - rd070707 - 16-11-2012
Injectors arrived today
need to get new seals and washers for them. Anybody have any tips on removing/ fitting? Also I'm on the look out for wheels if anyone sees anything that may be of interest. Going for a euro look but hard to find in 4x108 pcd
RE: rd's 306 hdi runabout - rd070707 - 18-11-2012
small update decided to paint my badge black diy style lol. few pics:
![[Image: 4uareo.jpg]](http://i50.tinypic.com/4uareo.jpg)
![[Image: 2d8jjlv.jpg]](http://i46.tinypic.com/2d8jjlv.jpg)
now i want black masks!
RE: rd's 306 hdi runabout - rd070707 - 22-11-2012
coilovers and rear shocks are in
massive improvement in handling, a lot more solid up front. MOT is on saturday so fingers crossed, then to get more bits sorted
RE: rd's 306 hdi runabout - rd070707 - 24-11-2012
MOT passed!
now to sort my binding brakes and crank pulley lol
RE: rd's 306 hdi runabout - rd070707 - 25-11-2012
hmmm phase one 306 nearby for sale, massively tempted to swap lol
RE: rd's moonstone HDi Project - rd070707 - 23-02-2013
thought I would give a quick update as I havent in ages lol. Coilovers are in and its lowered at the rear too. Got my roof bars fitted too as well as tiidying up the interior
![[Image: vimm8k.jpg]](http://i48.tinypic.com/vimm8k.jpg)
plans going forward are:
decat, de backbox
gti brakes
new wheels
stage one map after a good service
heading down the euro route with the appearance so we will see what it ends up like lol
will get up some good pics after shes got a good clean
RE: rd's 306 hdi runabout - Oil-burner - 23-02-2013
(18-11-2012, 03:34 PM)rd070707 Wrote: small update decided to paint my badge black diy style lol. few pics:
now i want black masks!
Then it will look very much like this
![[Image: A08507EB-7A19-4118-B08B-39260F3CE45E-260...1A8DA7.jpg]](http://i1020.photobucket.com/albums/af327/anti_hero86/A08507EB-7A19-4118-B08B-39260F3CE45E-260-00000029241A8DA7.jpg)
Infact the pic angle is very similar too lol
RE: rd's moonstone HDi Project - rd070707 - 23-02-2013
Lol yours is cleaner and have black masks...which I WANT! hopefully will look more distinct when its finished though
RE: rd's moonstone HDi Project - Piggy - 23-02-2013
looking real clean...very nice
RE: rd's moonstone HDi Project - Oil-burner - 23-02-2013
Haha get them in the oven then pal, if you crack on you can have them back on the car tomorrow!
rd's moonstone HDi Project - kentiiboii - 23-02-2013
(23-02-2013, 02:59 PM)Oil-burner Wrote: Haha get them in the oven then pal, if you crack on you can have them back on the car tomorrow!
Need to do mine when weather warms up
ill have crystals from dturbo to
RE: rd's moonstone HDi Project - rd070707 - 23-02-2013
I have a list of stuff to do don't have the time for the masks atm. Had to raise the back end up a bit as it was rubbing. Will be interesting to see how long this beam lasts now...it does have camber and being lowered probs don't help but we'll see haha.
The wheels let it down massively lol. Hate lasers
rd's moonstone HDi Project - rickye - 23-02-2013
Ah don't worry bout camber, mines got a lot of camber n still drives fine
Looks the part just needs cyclones
rd's moonstone HDi Project - kentiiboii - 23-02-2013
Bearing on my dturbo had shot and camber one side. Can't even tell tbh!
RE: rd's moonstone HDi Project - rd070707 - 23-02-2013
Been driving it this evening and tbh it doesn't sound as dodgey now but the camber on the left side is epic. Although it still clears the inner arch a fair bit, to the eye it looks worse lol.
il not bother with clones lad think il just wait to get my new wheels, and if all goes to plan they should be awesome
RE: rd's moonstone HDi Project - DazzaHDI - 23-02-2013
cyclones ftw
ive got a black 2.0HDI with cyclones on, low profile tyres but i get wheel wobble at 70+ so im gonna get my other set of cyclones sprayed white and put on, what you reckon lads?ohhh what you lads done under the bonnet to give you more poke? other than the obvious like remapping etc
RE: rd's moonstone HDi Project - rd070707 - 23-02-2013
There's good guides on here for Hdi tuning which has all the info you need in detail
RE: rd's moonstone HDi Project - rd070707 - 24-02-2013
picked up a near rear drivers door today, had a dent in mine which someone tried to fix but failed lol.
oil-burner one of my lights has condensation on the inside, could it be saved in the process of doing the masks or am i better just looking for a new headlight?
camber ftw
![[Image: jiytsw.jpg]](http://i45.tinypic.com/jiytsw.jpg)
i need STANCE! oh and it needs a clean
RE: rd's moonstone HDi Project - Oil-burner - 24-02-2013
Yeah mate, should be fine as long as theres no cracks in it.
Just make sure you whack loads of silicone round it.
RE: rd's moonstone HDi Project - rd070707 - 24-02-2013
cheers mate need to get this done makes such a difference. the list just gets bigger and bigger lol