+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: P Bushes + Wishbones (/showthread.php?tid=21517)
Pages:
1
2
RE: P Bushes + Wishbones - Tom - 21-02-2014
Man they're some pretty linkages. How do they feel Tom? Giggidy.
RE: P Bushes + Wishbones - Toms306 - 21-02-2014
Feel nice, tight and precise. Also seems to have shortened the throw slightly too which I didn't expect, getting first isn't a massive stretch as it was before.
RE: P Bushes + Wishbones - bigcheez2k3 - 22-02-2014
How much were they? Been considering the Baker BM ones Grant is doing in the group buy.
RE: P Bushes + Wishbones - Toms306 - 23-02-2014
I think miles is doing a group buy on them at 30 posted.
RE: P Bushes + Wishbones - ADV_93 - 23-02-2014
Lemforder ftw
RE: P Bushes + Wishbones - Eeyore - 23-02-2014
awesome work tom
Need to do this on my 1.8.
P Bushes + Wishbones - devils_fuel - 01-03-2014
(19-02-2014, 04:29 PM)Jenkosowls Wrote: It's actually the later mk1 berlingos that had them bushes mainly the heavier payload versions. I'v got berlingo on an s reg with just the standard p bushes as on the 306
Didn't you fit the partner/berlingo bushes to a 306 or is that someone else, it was a good thread !
(20-02-2014, 08:36 PM)Connor Wrote: Tom its easy, cut the rubber so its just the sleeve left on the wishbone, then hacksaw a diagonal line across it, but before you get all the way though, hit it with a hammer and crack the last bit and they practically fall off
Indeed they do
That all sounds familiar...did you ever do the write up after taking the pics changing the pair of mine? Both mine need doing again
RE: P Bushes + Wishbones - Toms306 - 02-03-2014
(01-03-2014, 08:43 PM)devils_fuel Wrote:(19-02-2014, 04:29 PM)Jenkosowls Wrote: It's actually the later mk1 berlingos that had them bushes mainly the heavier payload versions. I'v got berlingo on an s reg with just the standard p bushes as on the 306
Didn't you fit the partner/berlingo bushes to a 306 or is that someone else, it was a good thread !
(20-02-2014, 08:36 PM)Connor Wrote: Tom its easy, cut the rubber so its just the sleeve left on the wishbone, then hacksaw a diagonal line across it, but before you get all the way though, hit it with a hammer and crack the last bit and they practically fall off
Indeed they do
That all sounds familiar...did you ever do the write up after taking the pics changing the pair of mine? Both mine need doing again
I ended up breaking several hacksaw blades and running out of time...for a few quid and 5 minutes the garage taking them off was definitely the best option for me lol.
P Bushes + Wishbones - devils_fuel - 02-03-2014
Connor and I used one hacksaw blade as that was all I had
took us 5 mins to cut through each side, you need to make sure the cut is straight and not under strain
RE: P Bushes + Wishbones - daddyfixit - 02-03-2014
the ones I fitted in march have turned into wet cornflakes already........going to price up meyle hd ones in the morning as theres a factors near my work that are a meyle distributor . ces,euro,gsf ones all seem poo ??