+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 205 DT sleeper - boosting video pg10 and pg11 (/showthread.php?tid=7178)
RE: 205 DT sleeper - boosting video pg10 and pg11 - Poodle - 26-06-2013
Thanks man, but i'll literally be replacing everything, got bad connections and mouldy wiring EVRYWHAR lol.
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 26-06-2013
ite mate, well if you get desperate for a bit, holla x
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
So............ What happened to the VNT?
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
It's on hold whilst I get on with some safety aspects; keeping the bonnet down, brakes, suspension.
I'm happy with 154bhp but I need to be safe whilst driving
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
(30-06-2013, 03:39 PM)ginge191 Wrote: It's on hold whilst I get on with some safety aspects; keeping the bonnet down, brakes, suspension.
I'm happy with 154bhp but I need to be safe whilst driving
Fair enough..
Mine handles like an absolute boat but still plan on 11mm bosch power first!
205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
Tbh, 9mm fuels absolutely fine to about 175.
11mm is a safe option IMO
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
(30-06-2013, 03:53 PM)ginge191 Wrote: Tbh, 9mm fuels absolutely fine to about 175.
11mm is a safe option IMO
175 ish is starting to push the 9mm tbh, personally I'd want an 11mm for anything 160+
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
(30-06-2013, 03:53 PM)ginge191 Wrote: Tbh, 9mm fuels absolutely fine to about 175.
11mm is a safe option IMO
I'd rather have the 11mm running 175 and not having to struggle or be worried about.
Mind you I've never had an 11mm so I may end up regretting it (although very unlikely).
RE: 205 DT sleeper - boosting video pg10 and pg11 - Jimbo - 30-06-2013
So 152bhp on what setup.
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
Standard 9mm, t2, TMIC, just a tune to the pump.
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
Forgive me for being naive and/or not reading, but where did those numbers come from?
RE: 205 DT sleeper - boosting video pg10 and pg11 - Jimbo - 30-06-2013
(30-06-2013, 05:39 PM)ginge191 Wrote: Standard 9mm, t2, TMIC, just a tune to the pump.
That does seem very high for what your running?
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
(30-06-2013, 05:50 PM)cwspellowe Wrote: Forgive me for being naive and/or not reading, but where did those numbers come from?
The dyno figures?
First run was 153.8
Second was 151.9
or something; off top of my head
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
(30-06-2013, 05:53 PM)Jimbo Wrote:(30-06-2013, 05:39 PM)ginge191 Wrote: Standard 9mm, t2, TMIC, just a tune to the pump.
That does seem very high for what your running?
^this. Exactly my thoughts.
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
As said; all other cars were pretty much spot on for their setup.
I can't say much else.. It's a boxer engine so slightly differs from the usual DT lumps thus 2bhp more standard.. Not that it makes loads of difference
You've seen the dyno graph. Not much else I can say..
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
(30-06-2013, 05:55 PM)ginge191 Wrote: As said; all other cars were pretty much spot on for their setup.
I can't say much else.. It's a boxer engine so slightly differs from the usual DT lumps thus 2bhp more standard.. Not that it makes loads of difference
You've seen the dyno graph. Not much else I can say..
f*ck the haters!
RE: 205 DT sleeper - boosting video pg10 and pg11 - Pompey306mark - 30-06-2013
I don't think that's high. Gt15 k14 were getting 130/140 in the past. My original engine with t2 kept up with 6s and other crap pre engine swap and t25.
Only difference is ginge wil lose power the longer he drives due to heatsoak. I bet his third run would have been lower if he had been allowed to do one.
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
(30-06-2013, 06:00 PM)Pompey306mark Wrote: I don't think that's high. Gt15 k14 were getting 130/140 in the past. My original engine with t2 kept up with 6s and other crap pre engine swap and t25.
Only difference is ginge wil lose power the longer he drives due to heatsoak. I bet his third run would have been lower if he had been allowed to do one.
Yeah, 130/140 in the past, but are you trying to tell me you can get an extra 15bhp by fitting a T2?
And not Max it's got f*ck all to do with hating, the numbers just don't seem.. right? That's all. We can all read a graph thanks.
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
(30-06-2013, 06:03 PM)cwspellowe Wrote: And Max it's got f*ck all to do with hating, the numbers just don't seem.. right? That's all. We can all read a graph thanks.
LMAO, I'm not max.
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
You southerners all look the same to me, edited accordingly
RE: 205 DT sleeper - boosting video pg10 and pg11 - silverzx - 30-06-2013
(30-06-2013, 06:06 PM)cwspellowe Wrote:
You southerners all look the same to me, edited accordingly
Hehe..
RE: 205 DT sleeper - boosting video pg10 and pg11 - Pompey306mark - 30-06-2013
Gt15 is smaller than a t2, it spools faster but not by much.
So yea I think a t2 would make 15bhp more than a gt15.
My t2 made 130 which was fubr'd on an unhealthy engine.
205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
Lol
I don't know why there's debate/hate around? The engine was only on 30k odd as I was told, the turbo was immaculate before it went in..
Again, I don't know what else to say.
RE: 205 DT sleeper - boosting video pg10 and pg11 - Pompey306mark - 30-06-2013
Hence my joke on Facebook when you first posted the results lol.
I thought this would happen
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
f*ck's sake boys. Hate to be blunt, it just comes as a shock that someone who can't even fit a cambelt managed to hit 150+bhp on a god knows how many year old T2 and TMIC.
So Mark, you knew what would happen exactly? That people would be surprised by the result? Thanks Captain Obvious...
RE: 205 DT sleeper - boosting video pg10 and pg11 - Pompey306mark - 30-06-2013
Your welcome grumpy.
RE: 205 DT sleeper - boosting video pg10 and pg11 - cwspellowe - 30-06-2013
(30-06-2013, 06:27 PM)Pompey306mark Wrote: Your welcome grumpy.
*you're
Torque's a little on the low side anyway. As i said, the numbers don't seem to add up.
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
Thanks for the input Chris..
I've been tuning XUD's for a number of years, and the first time I attempted a cambelt change was on this engine change. I think it's a bit unfair to put both in the same category; final power output..
RE: 205 DT sleeper - boosting video pg10 and pg11 - Jimbo - 30-06-2013
In this case my t2 bosch with my fmic should make that sort of power with the correct fuelling
RE: 205 DT sleeper - boosting video pg10 and pg11 - ginge191 - 30-06-2013
Technically, yes.
Again, consider the mileage on this engine, and the "right fueling" isn't an easy step