+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Matts Onyx Rallye. 182.1bhp & 154.5ft/lb Wilwoods & axle arrived! Welding finished! (/showthread.php?tid=21456)
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - silverzx - 28-01-2015
Those wheels look the don.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 28-01-2015
Which wheels?
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - 7057sam - 28-01-2015
Can we have a update please
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Poodle - 29-01-2015
Er, what do you think that was?
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - silverzx - 29-01-2015
(28-01-2015, 03:09 PM)Matt-Rallye Wrote: Which wheels?
The don ones.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 16-03-2015
Finally wheeled this out of the shed the other day and made a definite list of jobs that need doing.
![[Image: IMG_2866_zpsuubxktrm.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_2866_zpsuubxktrm.jpg.html)
![[Image: IMG_2867_zpsgp2mcn5q.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_2867_zpsgp2mcn5q.jpg.html)
![[Image: IMG_2868_zps1zwd0dm6.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_2868_zps1zwd0dm6.jpg.html)
Doubt the rallye will be sorted for spring action day but will definitely be doing FCS and pugfest
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Frosty - 16-03-2015
I guess the list starts with a wash
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 16-03-2015
List starts with a wash, visit too the paintless dent removal guy then a full paint correction and detail. Cant afford a full respray this year and got too many other commitments so will have to work with what ive got.
Im welding it up this week as im sick of waiting for 'professionals' to do it who keep pissing around and letting me down.
Needs an axle and lowering all round then just gonna give the underside the underseal treatment.
Still need loads more on top but that should get it through an mot and get it looking somewhat tidy. Also gotta slap a timing belt on it and the mandatory water pump etc.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - 7057sam - 16-03-2015
FFS Matt chuck a bucket over it
You should definitely get the megane out on track at combe
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 16-03-2015
Pah it'll have a wash soon
Meggy will be at spring action day but not on track, its a daily and i cant afford to wreck it although i would love to really test it out at least once
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - ozonehostile - 16-03-2015
My ramps free whenever you need it dude
Also do what we discussed the other night about building the rallye Peugeot never bothered to
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Poodle - 16-03-2015
(16-03-2015, 01:25 PM)Matt-Rallye Wrote: Im welding it up this week as im sick of waiting for 'professionals' to do it who keep pissing around and letting me down.
Why is this a thing? I've yet to meet a welder that's capable of following through with a booking or not overshooting a deadline by anything less than two weeks...
Good to see this making a return to the fore, is she mot'd and taxed and ready to roll? Should stretch her legs down this way for pugrun next month.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 16-03-2015
Unfortunately shes all out of legalness now chaps
wont be long untill shes sorted just time and finances hindering progress currently
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 28-03-2015
Right then. Better get this sorted hadn't i.
Jobs to do:
Change axle
Sort dash bulbs
Abs sensor
Finish welding
Bleed brakes
MOT, tax & insure it...
It's gonna be an expensive month before pug run
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Poodle - 28-03-2015
Good man!
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Orta - 28-03-2015
Good man. I like a bit of dirt ;-)
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - lolsteve - 28-03-2015
Nice power results, any idea what it was at the wheels?
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 30-03-2015
(28-03-2015, 11:27 AM)lolsteve Wrote: Nice power results, any idea what it was at the wheels?
Cheers steve
She was showing 165bhp and 141ft/lb at the wheels which i was pleased with.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 20-04-2015
(28-03-2015, 10:16 AM)Matt-Rallye Wrote: Right then. Better get this sorted hadn't i.
Jobs to do:
Change axle
Sort dash bulbs - SORTED
Abs sensor - SORTED
Finish welding
Bleed brakes - SORTED
MOT, tax & insure it...
It's gonna be an expensive month before pug run
Also after seeing the state of zakks '6 i shall be pulling my sideskirts off and praying the sills are solid
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - ozonehostile - 20-04-2015
Worth a check for sure, hopefully the welding on yours won't stretch any further than the hole in the floor.
Although if my sill replacement works out I might be able to offer a service haha
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 22-04-2015
Well the skirt removing went really well...
![[Image: IMG_3181_zpsjw6izvwa.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_3181_zpsjw6izvwa.jpg.html)
![[Image: IMG_3179_zpslvgziarw.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_3179_zpslvgziarw.jpg.html)
Looks like i better get the welder out
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - RetroPug - 22-04-2015
Oh dear. I'm beginning to want to just leave mine on until my feet start getting wet.
Hope you get it sorted.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 22-04-2015
(22-04-2015, 11:37 AM)RetroPug Wrote: Oh dear. I'm beginning to want to just leave mine on until my feet start getting wet.
Hope you get it sorted.
seriously take them off sooner rather than later, wish i had done this last year when it was probably solid as a rock
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - mr_fish - 22-04-2015
Reckon its something in the Herefordshire air
sucks though Matt. Good luck with the repairs though!
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 22-04-2015
(22-04-2015, 02:17 PM)mr_fish Wrote: Reckon its something in the Herefordshire air
sucks though Matt. Good luck with the repairs though!
Definitely something in the herefordshire air! or possibly the amount of salt they throw on the roads over winter
Cheers buddy, hopefully thats the worst of it and it can be sorted asap!
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - ozonehostile - 22-04-2015
I urge anyone with a 306 with original skirts to take them off for a look.
Me and Matt will be sill repair experts by the end of the month it seems
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - adam b - 23-04-2015
(22-04-2015, 08:57 PM)ozonehostile Wrote: I urge anyone with a 306 with original skirts to take them off for a look.
Me and Matt will be sill repair experts by the end of the month it seems
I urge anyone to look at the area where the chassis legs meet the bulkhead, inside and outside the car. My strongbow-piss gti6 looked ok (well with a bit of welding on the main rails) until the carpet came out.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - 7057sam - 23-04-2015
Yep
My astor looked relevantly mint until I started looking,mine was particularly bad on the chassis leg/jacking point.
RE: Matts Onyx Rallye. RR Results are in..182.1bhp & 154.5ft/lb - Matt-Rallye - 01-06-2015
Been a busy few days..
from this: (how its been since october last year!)
![[Image: IMG_3522_zpsycxvhgwu.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_3522_zpsycxvhgwu.jpg.html)
To this:
![[Image: IMG_3615_zpsd3cb43oq.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_3615_zpsd3cb43oq.jpg.html)
![[Image: IMG_3616_zpspswdetqy.jpg]](http://s143.photobucket.com/user/matt-taylor/media/IMG_3616_zpspswdetqy.jpg.html)
Finally got my ass into gear, dragged it out the shed and after a brief blip up the road.. have a renewed ambition to get it to pugfest this year. so gave it a wash and polish. unfortunately the 'dry' (read: Damp & Humid) storage it has been in has wrecked the paintwork on the bonnet and drivers wing, luckily i have a spare onyx wing and ozone has a bonnet for me so it should be looking ok(ish) for pugfest, just need to change axle, weld the sills, change strut tops & replace all bulbs and she should be good for MOT. might need some better discs and pads up front, i still cant get used to a car now without brembos
RE: Matts Onyx Rallye. 182.1bhp & 154.5ft/lb. Pugfest prep begins! - ozonehostile - 01-06-2015
No reason why it shouldn't be ready now you've got a unit on the estate
II'm sure a weekend on my ramp will sort most of it out, could tell you've found the enthusiasm for it again from the huge grin on your face when you came around the other day