Guide - Removing Front Bumper

[Ambrosio]

Hi there.

I'm 306brasil.com.br moderator, and think fair debut here collaborating with somehow (i hope)

What you need:

- Torx (T15 or T20)
- 10mm wrench
- Philips screwdriver

Remove the front wheels helps the service

First, remove these 3 screw with the Torx in both sides



After remove, this part is out



This will give access to the upper screws bumpers

After this, remove these 3 screws in the sump guard with 10mm wrench



Finishing this, you have the lower part job finished.
Now starts the boring part.... The upper nuts.

2 nuts in the left side (Passenger side in the UK cars) - 10mm wrench



And 2 more in the right side (Driver side in the UK cars) - 10mm wrench
Ignore the black nuts (whitout prejudice :p), what matter are the silver nuts.



Finishing this, the bumper is out!
The "X" tags are fit points and the "circle" tags are fixation points with the nuts/screws

In the car



And in the bumper



The "square" points are the fog lights fixation.


Regards, Ambrosio
(sorry for my bad english)