+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12)
+--- Thread: Welding (/showthread.php?tid=35646)
Welding - Moonwalker - 27-02-2017
Well, my 6 is now garaged, and I've been doing work to it over the last few months, now I have found that the previous owner has jacked it up at the wrong point, and there is now a small hole and rust on that patch.
Does anyone know how much it would roughly cost to fix?
Will
RE: Welding - welshpug - 27-02-2017
depends where that point is and how extensive the repair needs to be.
RE: Welding - Moonwalker - 27-02-2017
(27-02-2017, 11:41 AM)welshpug Wrote: depends where that point is and how extensive the repair needs to be.
Hi, thanks for the reply. I would say the hole is about an inch across? Everything else around it is still solid.
RE: Welding - welshpug - 27-02-2017
and where is said hole?!
RE: Welding - Moonwalker - 27-02-2017
(27-02-2017, 01:01 PM)welshpug Wrote: and where is said hole?!
The hole is underneath the ramp pad in this pic.
RE: Welding - Poodle - 04-03-2017
Looks like you've got problems on the chassis rail there as well, might be worth having a better check over if you're bothered about rust. Is the hole on the sill or in the floorpan? Is it on a curve, in a corner or on the flat?
RE: Welding - Moonwalker - 04-03-2017
It's only on the floor pan on the flat, nothing else's around it, apart from the rail.