Another Warning: Run away Diesels

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Another Warning: Run away Diesels
#31
(25-12-2012, 08:29 PM)Dan! Wrote:
(25-12-2012, 08:05 PM)Piggy1987 Wrote: emergency inline butterfly????

boss did this once to a customers car...he a right idiot...faffing around, ended up refilling with oil twice....7k rpm xud AND...bang

we rang customer and said waiting on a filter...forman and I rebuilt it for collection the next day...

customer never knew!!

Inb4 cowboy

Inb4potkettleblack
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#32
About as funny as cot death you farmer (unt
Reply
Thanks given by:
#33
i didnt do it....our stupid idiot of a arogant boss did it...we had to fix it!!!

fyi....i quit not long after....if the old sod dies I may go back...he made life hell...

foreman was ace though...knows pugs/citroens better than anyone I know

tiz why I dont trust a garage too

And thanks for all the abuse...I always love when forum bullies go for it...esp on someone innocent!!

oh and Station Auto Services, Hereford. I wouldnt go there either...unless the boss has died from smoking 50 a day while in the workshop next to you when ya draining a fuel tank!!!
Wishes for more power...
Reply
Thanks given by:
#34
(25-12-2012, 08:59 PM)Dan! Wrote: About as funny as cot death you farmer (unt

Again... Potkettleblack
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#35
oh and Station Auto Services, Hereford. I wouldnt go there either...unless the boss has died from smoking 50 a day while in the workshop next to you when ya draining a fuel tank!!!
[/quote]

You used to work at station auto services?
Current stable
'09 Mercedes E320cdi wagon 
'99 306 gti6
Reply
Thanks given by:
#36
(25-12-2012, 08:05 PM)Piggy1987 Wrote: emergency inline butterfly????

boss did this once to a customers car...he a right idiot...faffing around, ended up refilling with oil twice....7k rpm xud AND...bang

we rang customer and said waiting on a filter...forman and I rebuilt it for collection the next day...

customer never knew!!

And im a cowboy for bleeding the brakes in the most simple manner ever.....right....
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#37
Ha ha ha owned piggy!!
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#38
least they got a rebuild but it is abit bad not telling them
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#39
What Darren said.



Good guide Ruan, had this on a Toyota Surf years ago but managed to catch it in time luckily...
Reply
Thanks given by:
#40
Er, hope that's not aimed at me Ruan lmao

I caught a runaway in the estate after the turbo shat itself. It was actually after being careful when the first GT2056 died, I forgot to clean the intercooler out and just as I was heading out for a run after replacing the turbo the revs started hanging, then rising, shut it off and drained the pipes, job done.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#41
(25-12-2012, 09:27 PM)darrenjlobb Wrote:
(25-12-2012, 08:05 PM)Piggy1987 Wrote: emergency inline butterfly????

boss did this once to a customers car...he a right idiot...faffing around, ended up refilling with oil twice....7k rpm xud AND...bang

we rang customer and said waiting on a filter...forman and I rebuilt it for collection the next day...

customer never knew!!

And im a cowboy for bleeding the brakes in the most simple manner ever.....right....

so what did I do wrong?? I did as I was told, which is rather important in your first 18mth of apprenticeship, put in unpaid overtime, and rebuilt a engine which I had no influence over blowing?!?!
Wishes for more power...
Reply
Thanks given by:
#42
Well ignoring all the cowboy comments lol, Another awesome write up from Ruan. Really like the co2 extinguisher trick i would never of thought of that!
Doesnt even own a 306.
Reply
Thanks given by:
#43
To be honest, as an employee at the garage it's up to you to do what the gaffer says. If he doesn't tell the customer that then it's not really your problem, as long as the car works you've done your job.

Still, i'd have considered walking pretty quickly if that's the way he treats customers. You're not being dishonest but the business certainly is.
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#44
If i was working in a garage dealing with cars in that manner, id be out the door, i spend half my life fixing stupid coyboy coverups that garages do, if your not going to fix it properly, why fix it at all, i just had a c3 this week, with management light blocked with mastic, lamba sensor snipped wires and glued up the sheath to look genuine, and wires pulled out the back of the fusebox...and best thing, all it needed was a new lamba sensor yet the garage went to all that hassle to cover it up and sell it , cant stand crooks like this!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#45
My car takes a ignition feed from the glow plugs, and as some of. Know i was hving idle peoblems a few days ago.

Anyway, my engine would rev really high amd even when i took key out it would continue running!

Till 20 sec later when the feed cut out, the engine too cut out :o which felt risky. So i need to sort out my ignition feed!
Reply
Thanks given by:
#46
Just keep it at 3krpm and you dont need to worry lol
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#47
Luckily I've never had this happen to my car, but I stopped it happening on my mates Rover 25 TD by chucking it in 5th and repeating dropping the clutch and stalled it.

Was scary as f*ck doing his, I'd be pissed if it was my car though.
MG ZR TD+ - gone and easily forgotten
Fabia vRS PD130 - New daily
Astra H VXR - new toy!
Reply
Thanks given by:
#48
(25-12-2012, 11:16 PM)darrenjlobb Wrote: If i was working in a garage dealing with cars in that manner, id be out the door, i spend half my life fixing stupid coyboy coverups that garages do, if your not going to fix it properly, why fix it at all, i just had a c3 this week, with management light blocked with mastic, lamba sensor snipped wires and glued up the sheath to look genuine, and wires pulled out the back of the fusebox...and best thing, all it needed was a new lamba sensor yet the garage went to all that hassle to cover it up and sell it , cant stand crooks like this!

we did fix it properly to be fair...full engine rebuild.

but as I said...I quit not long after...shame coz was well equiped and clean and the foreman was great...just crap boss.

I hate them too chap...

mate bought a C2 last year...noticed no abs...and then no abs light. previous owner had stuck tape over it...turns out they had replaced a front wheel bearing with non abs bearing...bodge jobs irritate the hell outa me...weather at home, car or companies selling crap
Wishes for more power...
Reply
Thanks given by:
#49
(25-12-2012, 06:06 PM)Jonny81191 Wrote: Dumdums sedan had a little rev when we first started it at Krisb's. Ash had the key out, stop lever on the pump did nothing, so me and Dumdum just sort of looked at each other and slammed our hands over the air intakes lol That stopped it, but it did eat my glove lmao

Yeah. That was scary lol. My fault, had been struggling to start it the previous day and given it a couple of turns of max fuel.

My advice is start the car with no FMIC pipes connected to the inlet so that you dont have the turbo multiplying the issues and if it does run away just bang your hand over the inlet sealing it. Also with no FMIC pipes youve got no chance of it sucking air past the boost leaks.
Reply
Thanks given by:
#50
Surely it wouldnt be safe to put your hand over the inlet?
Doesnt even own a 306.
Reply
Thanks given by:
#51
(26-12-2012, 06:03 PM)Tom Wrote: Surely it wouldnt be safe to put your hand over the inlet?

They do suck pretty hard but I dont think it's pull your hand through mate! lol Big Grin But as soon as you get a decent seal theres no oxygen for the engine to burn anymore anyway, should stop almost instantly.


I thought my HDi was running away like this the other day, I let off throttle and the car sped up! Nearly shat myself but blipped the throttle and it dropped back to idle so was just a dodgy/sticky sensor lol...phew! Rolleyes
Reply
Thanks given by:
#52
(26-12-2012, 06:03 PM)Tom Wrote: Surely it wouldnt be safe to put your hand over the inlet?

Me and dan have done it before and you wouldn't want it on for more than a second or so !
On the 306 waiting list.
Reply
Thanks given by:
#53
(26-12-2012, 06:09 PM)Jake Wrote:
(26-12-2012, 06:03 PM)Tom Wrote: Surely it wouldnt be safe to put your hand over the inlet?

Me and dan have done it before and you wouldn't want it on for more than a second or so !

True dat
[Image: edit2_zpsbe60b3ca.jpg]

Team derv FLAME and CONROD spitters
Reply
Thanks given by:
#54
(26-12-2012, 06:09 PM)Jake Wrote:
(26-12-2012, 06:03 PM)Tom Wrote: Surely it wouldnt be safe to put your hand over the inlet?

Me and dan have done it before and you wouldn't want it on for more than a second or so !

EH? Man up lol

Although TBF it does suck pretty goddam hard (inb4 giggity)
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#55
Yeah, it's got a damned good suck on it, speshly when the turbo gets up and blows....
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#56
I thought just the engine sucking was pretty good!
Doesnt even own a 306.
Reply
Thanks given by:
#57
(26-12-2012, 06:03 PM)Tom Wrote: Surely it wouldnt be safe to put your hand over the inlet?

Its not on a runaway car really. Ive heard stories of peoples fingers getting broken doing it as the forces involved are pretty huge, mine sucked the glove off jonnys hand and tried ripping the gloves off mine. The force on mine was split between 4 inlet runners as the UIM was off.

At 6000rpm (runaway engine speed) the engine is trying to suck in 100L of air a second, double that it its at a bar of boost at the time. And imagine the force involved if you look at it as 100-200L of water trying to flow through a 60mm pipe in 1 second and you see the force involved.
Reply
Thanks given by:
#58
Just stuff a rag down it as ruan says, and if you don't have a rag to hand, your shirt will do lol
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#59
this thread is scary :o.

I still have nightmares about my engine running away. Honestly.

Gov modded myself, and the car would idle at 600rpm, then just shoot to 9000 :o

thank God its fixed now.

Still get the dreams though.
Reply
Thanks given by:
#60
Ive had this years ago with a escort 1.8td. randomly in maccy d's drive throught just ran away with the revs from idle went mental wouldnt stop for ages didnt know what was happening and then cut out and there was a massive black cloud behind me. scary stuff. The car worked for a while after that then no more.

Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 2 Guest(s)