12-08-2014, 11:05 PM
Personally wouldn't pump air into the casing buddy, just a recipe for moisture to get in and crud up everything - if it was all conformal coated, I'd say otherwise, but it's bare exposed connections, you'll have green crusty joints in seconds...
The FETs ain't going to pump a massive amount of heat out - if anything just pop the fan inside the case just to move a little bit of air round - it's not going to overheat the air inside the case...
Also - want a REALLY cheap way of getting 12 pins through that?!
Cheap, reliable, easy to come across, easy to terminate, only 6 pins, but just put two connectors on it and label them If you're wanting lovely military spec connectors?
Not cheap mind, but are lovely connectors.
The FETs ain't going to pump a massive amount of heat out - if anything just pop the fan inside the case just to move a little bit of air round - it's not going to overheat the air inside the case...
Also - want a REALLY cheap way of getting 12 pins through that?!
Cheap, reliable, easy to come across, easy to terminate, only 6 pins, but just put two connectors on it and label them If you're wanting lovely military spec connectors?
Not cheap mind, but are lovely connectors.