Was a bit...
[attachment=16486]
[attachment=16487]
All coz I didnt spot this when rebuilding it...
[attachment=16488]
So Im doing the DRL fogs, resealing the headlights, replacing wing and try n get all the panel lines to match next. And give it all a good clean!
New shorter aerial too as the original snapped
Made my own pipe up for crank breather too, it been leaking and they go so brittle
Thats a replacement sump by the way!!
Also did a temp gauge test, works spot on, also the sensor seems to be reading right, guna do a bench test on a spare and see what I get
[attachment=16486]
[attachment=16487]
All coz I didnt spot this when rebuilding it...
[attachment=16488]
So Im doing the DRL fogs, resealing the headlights, replacing wing and try n get all the panel lines to match next. And give it all a good clean!
New shorter aerial too as the original snapped
Made my own pipe up for crank breather too, it been leaking and they go so brittle
Thats a replacement sump by the way!!
Also did a temp gauge test, works spot on, also the sensor seems to be reading right, guna do a bench test on a spare and see what I get
Wishes for more power...