11-11-2012, 07:55 AM
this is how i would do it i would find a ignition live from the back of your ignition switch then a piece of wire and add a inline fuse holder into it and put a fuse the same rating as what the original brake light fuse should be then the other end crimp on a spade connector and put on to the ignition live side of the brake light switch. (you have to cut the plug of the exiting brake light switch wiring plug just add a spade connector to the wire that runs to the brake lights)
remove the proper brake light fuse out the fuse box completely as its not being used.
remove the proper brake light fuse out the fuse box completely as its not being used.