Fiat Coupe Brembo Calipers + Mintex 1144s

[Dum-Dum]

Hello everyone, I have a set of Brembo Calipers off a Fiat Coupe. THESE WILL NOT FIT A 306! as they have 130mm mounting holes not 80mm that the pug has but other than the calipers are identicle, they even take the smae pads and they are fitted ith mintex 1144s that are new but "shop soiled"

Looking for £100 Posted or £80 collected

[jammapic]

So if they won't fit a 306... why you selling them on here?!!

[mark_airey]

Why not just make a mount with the correct spacing and fit them to your cabby??

[Dum-Dum]

So if they won't fit a 306... why you selling them on here?!!

In case someone wants to make mounts for them.

Why not just make a mount with the correct spacing and fit them to your cabby??

Cos I CBA, dont have the machinery and I have something far far cooler lined up

[Dum-Dum]

Now on ebay at £120 but ill honour the lower price to anyone here

[ginge191]

i offer a mars bar and a REAL bumble bee onesie, i find it hard to believe you would turn this down.
Thanks.

[Grant]

Very interested in these Dum-Dum.
All that would be needed to fit them is a 130mm mount machined? Are there any available to buy? Or designs available? As my old man has CAD/CAM at work and has done similar things for me in the past...

Also do you have pics of them please?

[Dum-Dum]

Grant ebay link is here for pics.
http://www.ebay.co.uk/itm/220924317833? ... _500wt_949

As ive said i will honour the price above for you (so £80 collected)

I dont think there is mounts ready made for them or any designs (as most people use the 406 brembos that have a different bolt spacing.

Supposedly the easiest way to make mounts is to get some MDF in the same thickness as the ally your gonna, make a template out of MDF, copy the MDF template into ally and then bolt it all up.

I also have a set of 305mm 406 coupe discs that ill throw in for £20, theyer brand new but with surface rust if you want.

[Grant]

They look clean, all the pistons move freely etc? No play or excessive rust?

I take it they sit at the correct diameter, but just need the bolt holes further apart?

[Dum-Dum]

I assume they work, I have no way of testing the calipers, they are very clean and defo no rust as theyer ally calipers. Theyer actually lighter than standard 266mm calipers.

They are identical to the 406 calipers bar the bolt holes being too far apart. there are ~130mm apart, the pug ones are ~80mm apart

[Grant]

Ok, ill take them off you Dum-Dum, can i pick them up at Aces on the 16th?

[Dum-Dum]

You can have them at the tunnel run on the 13th. Do you want the discs as well?

Are you definite gonna 100% have them and ill end the eBay listing

[Grant]

Ill take the discs too, and yes 100% mate. Forgot about the tunnel run....div lol. Yeah ill take them then mate

[Dum-Dum]

Right Auction ended mate. Theyer ready for you for the 13th (or if you want to collect them before)

Im going to farnborough to get my new car on tuesday morning if your local to there and want them soon

[Grant]

Ill wait until the tunnel run mate.
Not like I can fit them, haven't got mounts made or anything lol...
Found a nice thread on the 306gti6 forum of someone fitting them so thats handy.
See you at the tunnel run