Rear lights

[306pc]

The rear o/s light on my phase1 doesn't work. Brake, indicator work only the side light working. Swapped bulb, swapped light unit.????? Would a blown fuse control just one bulb?

[Mattcheese31]

Take light apart, clean all bulb contacts and try again

[Piggy]

As above... Also add a earth to the board if still no better...

[RetroPug]

It could be a blown fuse. Do your sidelights on the front work? They are on the same fuse as the O/S rear light on a Ph.1.

I have had the exact same problem and it was the fuse for the sidelights that had blown. Check that plus any other fuses you can find.

Here's a list of fuses, look at F4:
http://www.peugeotlogic.com/fuses/fuses3...elist7.htm

[306pc]

It's earthed already. Front lights work. I'll give the contacts a good clean tomorrow. Cheers.

[RetroPug]

Sidelights definitely work? On a Ph.1 there's a dim dip relay that makes the headlamps come on faintly when the sidelights are lit so that if they do die there is some illumination.