Worrying noise

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Worrying noise
#1
The hdi has this grinding/scraping noise when coasting a long, as soon as i accelerate it stops. Its getting louder and louder and i dont know what it could be, any ideaa?
[Image: e0d4ac7c-727f-46a8-ae0c-d4a324a8a667_zpsyn3ibroz.jpg]
Reply
Thanks given by:
#2
Possibly a driveshaft.
Reply
Thanks given by:
#3
Is it relative to road or engine speed?
[Image: P1060836_zpsz3xgxt7q.jpg]
Reply
Thanks given by:
#4
Im not sure yet ive only driven to work and back which i only can go upto 40mph it doesnt seem to matter what speed im doing
[Image: e0d4ac7c-727f-46a8-ae0c-d4a324a8a667_zpsyn3ibroz.jpg]
Reply
Thanks given by:
#5
See if you can work out what makes it happen, what makes it worse and how you can stop it, will help us work out what's happening.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#6
its French! look underneath to see what's fallen off and dragging on the road

https://www.check-mot.service.gov.uk/
GTI6 Info

Don’t drive faster than your guardian angel can fly.

Reply
Thanks given by:
#7
Well on the way to work it wasnt doing the grinding noise but it was humming, maybe wheel bearings?
[Image: e0d4ac7c-727f-46a8-ae0c-d4a324a8a667_zpsyn3ibroz.jpg]
Reply
Thanks given by:
#8
Where is the noise coming from?
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#9
Sounds like its coming from osf wheel
[Image: e0d4ac7c-727f-46a8-ae0c-d4a324a8a667_zpsyn3ibroz.jpg]
Reply
Thanks given by:
#10
may be wet where you are now, any difference when wet??

brakes ok and not "pulling".......

noise changes when brakes applied??

noise changes when car gently ( and safely ) weave from side to side??

noise lessens when weaving to the right and increases when weaving to the left??

visual check underneath all ok??

can you shake the wheel and its got play when car is on the deck??



raise car on that side and check.......check pads also.....any road work where you are??
Reply
Thanks given by:
#11
You should be able to hear/feel a rough wheel bearing if you jack the car up on that corner and shake/spin the wheel.
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#12
my money on it been a wheel bearing.
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)