04-04-2012, 05:57 PM
Connor Wrote:Changing the p bushes are easy... wishbone off, cut the rubber to get the metal part off, then cut some of the remaining rubber off to get to the metal sleeve, then take a hacksaw to the sleeve, once you're almost through, smash it off with a hammer and chisel (or any chisel substitute) clean up the surface of the wishbone, smidge of grease then tap the new pbush onto the wishbone with a hammeryes that's it . . . . . . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs