FOR SALE - Peugeot 306 Convertible

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FOR SALE - Peugeot 306 Convertible
#1
2003 '52' plate Peugeot 306 Coupe Convertible 1.8, 96,000 miles with Full Service History, can be Sold with or without Full M.O.T., Electric Roof, E/W, E/M, R/C/L, Alloys, CD/Radio, Very Good Condition. All it needs for testing as far as I'm aware is 2 front tyres and wiper blades.
Car is situated in Chapeltown, Sheffield S35. Junction 35 M1 North or 36 South.

With FULL M.O.T. = £995 o.n.o.
Reply
Thanks given by:
#2
looks nice but you're asking for a grand with no MOT? . . . . . i'd stick one on if i were you mate . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#3
yeh you may get that price with an MOT but you wont get anywhere near that without. How is anyone going to drive it away either?
Reply
Thanks given by:
#4
(18-07-2014, 02:29 PM)smartgun Wrote: With FULL M.O.T. = £995 o.n.o.

Am I the only one reading that? Confused

He says he can leave it un-MOT'd. Presumably to make it cheaper for someone that gets cheap MOTs and has their own trailer?
Reply
Thanks given by:
#5
(18-07-2014, 05:45 PM)Toms306 Wrote:
(18-07-2014, 02:29 PM)smartgun Wrote: With FULL M.O.T. = £995 o.n.o.

Am I the only one reading that? Confused

no...I read that too, before Matt even posted. Poor guy!

GLWTS! Smile
Wishes for more power...
Reply
Thanks given by:
#6
Nice just bought a new car aswell but thats abit much for me. More local tho would have been handy. GLWTS
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#7
(18-07-2014, 05:57 PM)Piggy Wrote:
(18-07-2014, 05:45 PM)Toms306 Wrote:
(18-07-2014, 02:29 PM)smartgun Wrote: With FULL M.O.T. = £995 o.n.o.

Am I the only one reading that? Confused

no...I read that too, before Matt even posted. Poor guy!

GLWTS! Smile

no i saw that, but i presume it doesn't have one now as he says it can be sold with full MOT, cut down on the crack guys, it's whack lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#8
(19-07-2014, 08:33 AM)Mattcheese31 Wrote:
(18-07-2014, 05:57 PM)Piggy Wrote:
(18-07-2014, 05:45 PM)Toms306 Wrote: Am I the only one reading that? Confused

no...I read that too, before Matt even posted. Poor guy!

GLWTS! Smile

no i saw that, but i presume it doesn't have one now as he says it can be sold with full MOT, cut down on the crack guys, it's whack lol

I would prefer to put a FULL M.O.T. on it before its Sold of course, but thought I'd give people the option. ANYBODY INTERESTED ??
Reply
Thanks given by:
#9
Give it a bit of back to black on that front bumper it looks awful.
Bye Bye D-Turbo
Phase 1 GTi-6 now has a new owner
Rolling in the: Phase 3 HDI Wagon

The current estate project: http://306oc.co.uk/forum/thread-22237.html
Reply
Thanks given by:
#10
Can't believe that No one is interested in this Beauty, whats up with people out there ?
Reply
Thanks given by:
#11
The problem is theres alot of them about for sale and not alot of people that want them ...

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#12
Would love a cabrio, but would have to be a derv.
Reply
Thanks given by:
#13
Mate I struggled to sell mine for 500 quid. Full 12 months mot 80.000 miles, great condition, etc.

Problem is they're just not worth anything any more unless they have a proper engine in (read: derv)
Supercharged XUD Project - Dead

HDi Cabby Project Click
Reply
Thanks given by:
#14
Been breaking these since 2009 2-3 a month sometimes & I must say there worth more in bits...
I had a 2002 with only 30K & broke it due to no interest in it.
Chris
Reply
Thanks given by:
#15
To be brutally honest mate I really fancy it but it's far more than I'd pay for a phase 2 1.8 cabby that'd need taxing by the sounds of it. These are brilliant cars but no bugger wants them, so they can be picked up very cheap.
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#16
FULL M.O.T. & 6 MONTHS TAX THEN ?
Reply
Thanks given by:
#17
ANY OFFERS ??? ANY ?? SENSIBLE ONES !!!
Reply
Thanks given by:
#18
why is the front bumper and the rub strips not colour coded . . .should be . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#19
(31-07-2014, 12:41 PM)Mattcheese31 Wrote: why is the front bumper and the rub strips not colour coded . . .should be . .Smile

Are you stating your opinion or fact? As they don't come from the factory colour coded on cabbys..
Reply
Thanks given by:
#20
(31-07-2014, 12:43 PM)JJ0063 Wrote:
(31-07-2014, 12:41 PM)Mattcheese31 Wrote: why is the front bumper and the rub strips not colour coded . . .should be . .Smile

Are you stating your opinion or fact? As they don't come from the factory colour coded on cabbys..

really? . . . oh don't see many round here and there's a gorgeous fully coded green phase 3 one local, sorry i thought the late ones did . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#21
Maybe I should say they don't all come colour coded Wink I've had two now that werent.
Reply
Thanks given by:
#22
Its a £600 car surely? Undecided
Wishes for more power...
Reply
Thanks given by:
#23
Matt JJ, None come colour coded from the factory, Not even later 02's Sad
Chris
Reply
Thanks given by:
#24
As above, cabbys all have the weird black bumper strips from the factory...which seems odd on a car that is purely designed for aesthetics... Confused
Reply
Thanks given by:
#25
(31-07-2014, 04:30 PM)Toms306 Wrote: As above, cabbys all have the weird black bumper strips from the factory...which seems odd on a car that is purely designed for aesthetics... Confused

fair enough, i know little about cabbies, other than the coded green one round here looks the dogs . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#26
Any Takers ?? Got to be someone out there that wants a Nice 306 Cabriolet ??
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Couple of Peugeot 205's for sale.. Chris1357 4 2,167 14-02-2016, 12:07 AM
Last Post: Chris1357
Big Grin For sale Peugeot partner van 306 td engine fitted Jamieh2013 16 4,263 10-11-2015, 08:53 AM
Last Post: Jamieh2013
  Phase 1 2.0 xsi Convertible Leemus 0 809 07-08-2014, 12:24 PM
Last Post: Leemus

Forum Jump:


Users browsing this thread: 1 Guest(s)