No boost with 11mm td04

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No boost with 11mm td04
#1
Can't seem to get the boost it had before it would go to 35+ and pulled fantastically. Same turbo but with wastegate welded shut (was just wedged before) and new rebuilt pump by tom(zx volcane) got plenty of offboost fuel and a haze on boost but it will not go about 23 maybe 25 when your getting upto 5k.

Same cooler setup only thing I changed was to a hdi gearbox but surely this wouldn't affect it.

Anyone any ideas I think pump is advanced pretty much all the way on the bracket
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#2
Boost leak? LDA cap in tight? LDA feed pipes on tight?
Stage 2 XUD Sedan
Reply
Thanks given by:
#3
Ye all seem fine is a different pin actually
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#4
I know it may sound stupid but any play in the shaft of the turbo?

Typically a TD04 will still boost 20-25 PSI even if it's f**ked.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#5
Sounds stupid lda pin the right way round
Reply
Thanks given by:
#6
id done up all pipes. will check down back on turbo pipe as it is a pita to get to
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#7
Ye pins right way around turbo was fine when it came off before and fins don't have any damage
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#8
Do you have any smoke whilst on boost. If not then you are burning all the fuel and the turbo cannot boost more without more fuel. If you have smoke on boost then you either have a boost leak/manifold leak or a dodgy turbo
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
Reply
Thanks given by:
#9
Ye it gives a slight haze out on boost. Going to get another turbo just incase it needs changing while the inlets out the way

LDA has veg on tho gave it a wipe will check it again incase it got there by accident while the top was off
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Top mount in a 306 with a td04 and 11mm pump will it cope with cooling? Paul_13 8 2,023 29-09-2014, 01:52 PM
Last Post: toseland

Forum Jump:


Users browsing this thread: 1 Guest(s)