Identify this Inlet Mani !

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Identify this Inlet Mani !
#1
Question 
When i bought the 205 it came with a boot full of parts - most of them useless crap like a dead lucas pump and another one in bits also strangely a load of timing cogs and a dead water pump

When I looked through them i found this inlet manifold and just wondering what its off and wether it'll go on my 1.9td so i could run a F.M.I.C ?

Id have to make up a plate to run one on my standard manifold as its square when it goes to the intercooler is this a good way round that or should i just get on and make a plate?

[Image: 5Bi9U.jpg]

[Image: t0WNY.jpg]
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#2
Non intercooled late xud7 early xud9 mani, Connets direct to turbo, and vac puump bolts onto it on the right.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#3
(06-03-2014, 09:08 AM)darrenjlobb Wrote: Non intercooled late xud7 early xud9 mani, Connets direct to turbo, and vac puump bolts onto it on the right.

Ever tried connecting a Intercooler ta one?
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#4
Looks like it would be a pain in the arse finding a way of getting pipes to it Andy. Not impossible, but not worth it in my eyes.
Reply
Thanks given by:
#5
Yea this Is a xud9 one and the turbo comes straight into there so if you was to use it attach a intercooler to it you would need to clock the turbo
Reply
Thanks given by:
#6
Alright cheerrs guys ill scrap that inlet then, found some measurements on here to make a plate up just need to source some steel ... off to cut something upp......
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#7
I could just sell you my spare that bolts on to the standard manifold, £30 posted Smile
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Reply
Thanks given by:
#8
Im alright thanks ill make one up bit strapped for cash atm
Cherry red 205 XUD VNT - Project thread here http://306oc.co.uk/forum/showthread.php?tid=25522
Reply
Thanks given by:
#9
No worries
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Reply
Thanks given by:
#10
Just read this, I'm crying out for an inlet adapter! Finished my 205 xud conversion now and that's one of the final touches I need. I can't buy one or pm though because I've not met the post count and don't want to spam my way up to 30 posts! Will there be another run of adapters being made up in the future?
Reply
Thanks given by:
#11
I have one but obviously you need more posts lol unless you have fakebook i can message you through there Smile
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Reply
Thanks given by:
#12
I do have Facebook, my name is Chris hall (my picture is me in a wheelchair) is that still within the rules though?
Reply
Thanks given by:
#13
would be ideal for someone wanting to steal tune a stock NA Wink
[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Relocation Mani Query silverzx 4 1,622 02-05-2015, 09:00 PM
Last Post: Lolben91
  DW8 intake mani on an XUD? 089 5 2,642 14-03-2015, 03:32 PM
Last Post: Ruan
  inlet mani studs philpemberton94 9 1,861 13-08-2014, 01:40 PM
Last Post: Dave

Forum Jump:


Users browsing this thread: 1 Guest(s)