Xantia manifold tight to master cylinder

[mikey b]

Fitted my xantia manifold and it's bleedy tight to the
Master cylinder any one had this before thanks

[WiNgNuTz]

I'm not sure if i'm just tired, but that doesn't make a great deal of sense to me. Can you edit your post with a bit of punctuation, and try to explain that a bit better please?

[zx_volcane]

There is both a short and a long version of the that type of inlet manifold.

You can either try and find another one that is shorter, or get handy with the grinder to make some clearance.

[mikey b]

Basically the manifold is tight to the master cylinder when it's on yep I will prob just get handy with the grinder

[Frosty]

I'll have a look at mine at lunch

[Chris_90]

Mine was tight on 205 bend the brake line slightly and it fits now event still very tight but it's not touching it any more

[Nath140889]

Heard of this before u can get a slight but of movement away from the master cylinder by adjusting the gearbox mount as it apparently slides left to right a bit when fitting

[mikey b]

Heard of this before u can get a slight but of movement away from the master cylinder by adjusting the gearbox mount as it apparently slides left to right a bit when fitting

Cool thanks will try this as well as grinding the manifold a little bit

[padge]

I ran the xantia mani, was very close but never had issues, the 406 inlet mani is the shorter one, but imo dosent look as good.