Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rotherham Autotronix Rolling Road Meet Pics!
#1
Great day out at Autotronix developments with 5 people Rolling and several people coming to watch Some good results and some suprises! Thanks to everyone coming along!!

First up was MattCheese
[Image: th_SAM_0246.jpg]

Matts run made
133.7 bhp and 188lbs/ft
[Image: SAM_0255.jpg]

Then sambarker did a run but had to be aborted to a slipping clutch which was a shame
[Image: th_SAM_0248.jpg]

Then GtiKyle did his run
[Image: th_SAM_0250.jpg]

Kyles run made
128.2 bhp and 213lbs/ft
[Image: SAM_0260.jpg]

Then mine was up
[Image: th_SAM_0252.jpg]

Mine made 120.4 bhp and 219lbs/ft With major over fuelling at the top hence the double dip
[Image: SAM_0259-1.jpg]

Padge finally turned up and got his arm twisted to do a run
[Image: th_SAM_0253.jpg]

He Made
152.8 bhp and 236lbs/ft as you can see he still has a problem 3.5k and leaking turbo seals
[Image: SAM_0301.jpg]

Then clive at Autotronix showed us what he does for a leaving in a westfield kit car powered by 2l vauxhall engine on ITB's Previously making over 180bhp but in for further development
[Image: th_SAM_0263.jpg]

Making
158.8hp and 149 lbs/ft on a basic map they put on to show us
[Image: SAM_0264.jpg]

Then we went on a quick drive for pics
[Image: SAM_0267-1.jpg]
[Image: SAM_0270-1.jpg]
[Image: SAM_0273.jpg]
[Image: SAM_0276.jpg]
[Image: SAM_0279.jpg]
[Image: SAM_0282.jpg]
[Image: SAM_0285-1.jpg]
[Image: SAM_0289.jpg]
[Image: SAM_0291.jpg]
[Image: SAM_0295.jpg]
[Image: SAM_0298.jpg]

Highlight of the day Matts Tax Disc!
[Image: SAM_0306.jpg]
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#2
Atleast padge got a better readout than last lol
Looks pretty good turn out. All dervs on the rollers?
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#3
You posted the wrong graph for my pic lol
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#4
Phill the last readout was 159.5bhp and 248lbs at rs tuning
[Image: Untitled-1_zpsc57da38e.jpg]
Reply
Thanks given by:
#5
4WayDiablo Wrote:Atleast padge got a better readout than last lol
Looks pretty good turn out. All dervs on the rollers?

Yep all Dervs RippThrough turned up but didnt want to shame us all with his 1,000,001 hp 1.4

Not a bad turn out to say all people had less than a weeks notice!
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#6
padge Wrote:You posted the wrong graph for my pic lol

Edited
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#7
padge Wrote:Phill the last readout was 159.5bhp and 248lbs at rs tuning
I know but that was over a 1krpm readout haha atleast this time you see whats going on
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#8
No, I wasn't putting the 1.4 on, it was funny enough listening the list of parts they were all going home to buy/fit to fix 'em for more ponies after the dissapointment of seeing the graphs lmao , without making them all cry with my 1360cc of raw power Wink
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#9
good laugh lads, first time i've done the RR thing and enjoyed myself, must tune more and get even more ponies Big Grin...and hey Ripper i was quite chuffed myself lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#10
Well, might slap the buggy on there just to see what the new engine makes with a basic map in about 3 weeks (should be about 210 or so hopefully, 'fore I get tinkering again ninja ) or so if anyone wants to tinker with the cars and run again?


Jenks will 'cause he's in the middle of fitting his new pump already, since his 120bhp, 220lbft diseasel can't outpace with my rabbit-powered heap lmao
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#11
will do if i get done what i want to before then......Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#12
I'm sure it won't take you 3 weeks to find a razor.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#13
Rippthrough Wrote:I'm sure it won't take you 3 weeks to find a razor.
LMFAO!
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#14
Rippthrough Wrote:I'm sure it won't take you 3 weeks to find a razor.
we can't all be naturally bald as a coot Pip . . . . . lmao
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#15
Aerodynamically efficient is the phrase you're looking for Wink
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#16
Rippthrough Wrote:Aerodynamically efficient is the phrase you're looking for Wink
heh heh . . . .Harry hill looking fcuker more like . .. . . .. :dance:

















luv ya really . . . . . :romance-heartsfade:
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#17
Mattcheese31 Wrote:luv ya really . . . . . :romance-heartsfade:

I know, that's why don't turn my back on yer. lol
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#18
[Image: picard_motivational_by_jasongallagher-d366ope.jpg]
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#19
Looks like a good day. I really want to get mine on the rollers. Think it's definatley down on power. Be interesting to see what it makes before my rebuild Smile
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#20
I was over the moon with mine anything over 120 would have been good as it was not a very strong engine before. Sounds good anall.

Uploading vids from back now
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#21
Rippthrough Wrote:Well, might slap the buggy on there just to see what the new engine makes with a basic map in about 3 weeks (should be about 210 or so hopefully, 'fore I get tinkering again ninja ) or so if anyone wants to tinker with the cars and run again?


Jenks will 'cause he's in the middle of fitting his new pump already, since his 120bhp, 220lbft diseasel can't outpace with my rabbit-powered heap lmao

Give us a heads up on that and i'll come have a watch
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Yorkshire meet pics 'tha knows. Pete 34 13,267 24-07-2013, 11:28 AM
Last Post: LadySteve
  Southern Rolling Road Meet Picture Thread, 29th June samass 42 14,193 04-07-2013, 08:29 PM
Last Post: puglove
  Rolling road 2/2/13 Ray West pictures Ricky 117 55,318 10-02-2013, 04:03 PM
Last Post: rocker8742

Forum Jump:


Users browsing this thread: 1 Guest(s)