Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust bend, downpipe into tunnel
#1
Does anyone know what angle this is? I thought it would be a 45 but when i looked it looks like its a bit steeper than that?
Doesnt even own a 306.
Reply
Thanks given by:
#2
think its 60degrees
Wishes for more power...
Reply
Thanks given by:
#3
60 is what im thinking, i swear i read it somewhere just dont want to buy it for it to be wrong Sad
Doesnt even own a 306.
Reply
Thanks given by:
#4
Im sure thats what I bought...

search around there is a thread somewhere on all the lengths/angles needed to make a system...its what I used.
Wishes for more power...
Reply
Thanks given by:
#5
Around 60 iirc, you can make it right by cutting pipe at slight angle, yes, this is a "bodge" but it really dosnt matter / for a few degrees isnt even noticable. Smile
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#6
Some threads say 45 and some say 60 :/ Then some say you need a 60 at the back and others say 45! AAAHHH
Doesnt even own a 306.
Reply
Thanks given by:
#7
I think its 60, will know for sure soon!
[Image: IMG_20131107_122557_zps2f2c548d.jpg]
Doesnt even own a 306.
Reply
Thanks given by:
#8
what elbow have you got off your turbo tom?
Reply
Thanks given by:
#9
2.5" tight radius thing into a flexi.
Doesnt even own a 306.
Reply
Thanks given by:
#10
Oh shit. So it's not a 45 afterall? What a fecking farce. That means my exhaust elbow was doomed from the start! Now I've got to work out 60 degrees which I have no idea how to do (45 degrees is more obvious) and this is why I thought it was 45 degrees:

http://306oc.co.uk/forum/thread-16440.html

He didn't have the decency to come back and tell the guy he was wrong! So other people find the thread (using the search function Rolleyes ) and then think it is right and go and do that just to find it's wrong.
Reply
Thanks given by:
#11
Did you ever find out what angle was needed? Was it 60deg?
Reply
Thanks given by:
#12
Yes mate 60 is grand at the bottom of the downpipe Smile
Doesnt even own a 306.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  The B***dy downpipe nuts unclebeast 10 1,433 11-05-2017, 06:31 AM
Last Post: yes306
  4 out of 5 Bolts Holding Downpipe silverzx 17 2,283 11-10-2014, 02:01 PM
Last Post: Dave
  D turbo downpipe fitting kit philpemberton94 8 1,650 12-03-2014, 06:27 PM
Last Post: Tom

Forum Jump:


Users browsing this thread: 2 Guest(s)