23-09-2013, 07:37 PM
has anyone ever fited a servo to a hdi? Just I need to change mine at weekend,
any help would be nice. Thankyou.
any help would be nice. Thankyou.
fiting a servo
|
23-09-2013, 07:37 PM
has anyone ever fited a servo to a hdi? Just I need to change mine at weekend,
any help would be nice. Thankyou.
23-09-2013, 08:06 PM
not too bad a job...access is just very tight.
why the change? very rare to fail Wishes for more power...
23-09-2013, 08:11 PM
When I press brake there a hissing come from servo dose dash have to come out
23-09-2013, 08:13 PM
have you checked the hose?!! and connection?
lol, no, dont need to remove dash Wishes for more power...
23-09-2013, 08:19 PM
If I move the rod that goes to brake pedal I can make it hiss
I take it bolts from behind dash
23-09-2013, 08:21 PM
yeah thats right.
take MC off. take off the brake pedal connection. unbolt servo. remove. may need to rock engine forward to get it out Wishes for more power...
23-09-2013, 08:26 PM
(This post was last modified: 23-09-2013, 08:29 PM by dturbo ash.)
I looked under dash I can't see any bolts
23-09-2013, 11:09 PM
There under the sound proofing 4 x 13mm nuts you'll need a knife a long extension and a uj to get them all
|
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Fitting A New Break Servo | TommiePuglet | 19 | 5,269 |
05-10-2017, 12:19 PM Last Post: TommiePuglet |
|
Brake booster servo | Welshy_Pete | 0 | 1,052 |
04-07-2017, 09:09 PM Last Post: Welshy_Pete |
|
Servo push rod adjustment. | allye | 2 | 1,126 |
02-02-2017, 08:57 PM Last Post: allye |