25-02-2015, 10:11 AM
Have tidied some bits up on the car. Such as cutting the centre console to fit around the hydro, clearing mud out the wings, making radiator brackets and making new FMIC brackets that don't sit so low.
Attaching rear speakers properly so no rattles!
Been playing with differentials, have a 3.7 LSD, 3.7 welded, 3.9 welded and 4.1 welded at my disposal. Refurbing the 4.1 at the moment.
Swapped my non ABS nose out in favour of an ABS style one so the prop won't need stretching.
After being disappointed that 6x2 output cups won't fit into the R33 casing I'm now on the hunt for some 5x1 shafts.
Also went to roll my arches and fit the 18s but they're not quite going to bolt straight on. For starters the 265/35 tyre is far to wide!
(This is with car jacked off he ground so suspension under no compression)
Sent from my iPhone using Tapatalk
Attaching rear speakers properly so no rattles!
Been playing with differentials, have a 3.7 LSD, 3.7 welded, 3.9 welded and 4.1 welded at my disposal. Refurbing the 4.1 at the moment.
Swapped my non ABS nose out in favour of an ABS style one so the prop won't need stretching.
After being disappointed that 6x2 output cups won't fit into the R33 casing I'm now on the hunt for some 5x1 shafts.
Also went to roll my arches and fit the 18s but they're not quite going to bolt straight on. For starters the 265/35 tyre is far to wide!
(This is with car jacked off he ground so suspension under no compression)
Sent from my iPhone using Tapatalk