Yorkshire Rolling Road Saturday 12th October confirmed

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yorkshire Rolling Road Saturday 12th October confirmed
#1
I have a provisional date booked in for saturday 12th of October from 10am. Same place as last year at Autotronix Developments who last year proved to have a pretty accurate dyno! Cost is £25 for 2 runs and and print outs and as proved last year by a few members free oil and water check up lol!

Clive is actually fobbing off the mx5 annual dyno day in favour for this so feel honored and let's not disappoint! Yet again a very reasonable price and as last year was an exciting event.


STRICTLY no racing or show boating. Although last year no one was anti social Mardy neighbors complained lets not give them any more reason to.

For those who didnt go to the last one here is the picture thread.
http://306oc.co.uk/forum/thread-6982.html

Please start a list of those rolling and those attending.

Rolling
1.Jenkosowls

Attending
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#2
If its after fcs I'm game
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#3
Would be interested
Reply
Thanks given by:
#4
I'll come to this one last one was Awesome! And I shall be in my own car this time Big Grin
Official Team Go-NAD fan club
Reply
Thanks given by:
#5
I'm not saying till the day. Last time I agreed to a rr meet in september my car died
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#6
I'd be up for that date permitting.
[Image: sig-3.jpg]
Reply
Thanks given by:
#7
I'll put myself down as a maybe, what with FCS and Scarborough.
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#8
Sure ill be able to come along
TD04 11mm Sedan, now 2.1 vnt

Sedan Project http://306oc.co.uk/forum/thread-5763.html

Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Reply
Thanks given by:
#9
sounds good, might even have the TD04 on by then . . . Rolleyes
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#10
Always guaranteed a good day out with an RR about...! Smile
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
#11
If I come I'll roll mine, Jenksowls is fitting my Bosch this weekend so it'd be nice to see how it's doing Smile
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#12
Should hopefully have a 535 and have it mapped by then can I still come even tho im not in a 306 anymore? Sad
[Image: J5hxCcC.jpg]
Reply
Thanks given by:
#13
I'll come along Smile
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#14
I would come put the 106 on for a laff, depending on the time and date



Reply
Thanks given by:
#15
Any opportunity to laugh at diesel owners.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#16
(03-06-2013, 11:48 AM)Rippthrough Wrote: Any opportunity to laugh at diesel owners.

if you can make it in the silver shed . . .Wink
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#17
Hey, it's an almost silver shed now.
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#18
Definately maybe, Been wanting to see how the van gets on for a while!
Team hand-painted-commercial Vehicle
Reply
Thanks given by:
#19
Ill come see how it goes with the new pump and turbo. Last time I smoked the road out
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#20
Yeah I'm in, In the slower-but-slightly-more-interesting-than-a-standard-406-coupe workhorse.

Rolling
1.Jenkosowls
2. Pete

Attending

--------------------------------------------------------------------------------
Team hand-painted-commercial Vehicle
Reply
Thanks given by:
#21
Rolling
1.Jenkosowls
2. Pete

Attending
1. chris_90 (unless i got gti6 running)



Reply
Thanks given by:
#22
i will come to this, should have new turbo on then so will be interesting . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#23
Il roll for the shits

in all fairness the dyno doesnt look like the best set up but seemed quite accurate


S2 HDi >click<
154bhp
280lbs/ft
Reply
Thanks given by:
#24
£25 is well cheap, I'm in Big Grin
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
#25
Could actually be up for this.

Been wanting to get mine done for a while and all the mods I want to have done should be done by then!
Reply
Thanks given by:
#26
Rolling
1.Jenkosowls
2. Pete
3.Danny2009

Attending
1. chris_90 (unless i got gti6 running)
[Image: image_zps45f2003b.jpg]

Team Doesn't own a 306
Reply
Thanks given by:
#27
Rolling
1.Jenkosowls
2. Pete
3.Danny2009
4.Mattcheese31

Attending
1. chris_90 (unless i got gti6 running)
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#28
Rolling
1.Jenkosowls
2. Pete
3.Danny2009
4. Karl1989

Attending
1. chris_90 (unless i got gti6 running)
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
#29
(03-09-2013, 07:20 PM)karl1989 Wrote: Rolling
1.Jenkosowls
2. Pete
3.Danny2009
4. Karl1989

Attending
1. chris_90 (unless i got gti6 running)

you've fcuked up the list . .lol
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#30
I'd like to come, if the cars ready...
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Free Forum Dyno / Rolling Road Day in Cornwall darrenjlobb 53 18,891 25-09-2016, 05:47 PM
Last Post: darrenjlobb
Star Rolling Road day (Doncaster) Mattcheese31 36 15,111 21-08-2016, 09:59 PM
Last Post: 399road
  incarnation this saturday! impotentials 0 2,771 19-04-2016, 06:04 AM
Last Post: impotentials

Forum Jump:


Users browsing this thread: 2 Guest(s)