Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Helpful members
#1
I know this was suggested on .net but wasn't bothered with because it would take work away from traders but seeing as we don't have traders I can't see the problem with it!
Thought it might be a good idea to get a list of members who are willing to help others with works on there cars.
This is not intended as a way for members to make money. It's purely as a way to help other members. If members want to thank you with money then that's their choice but I know I would be happy with a cup of coffee....

important Note
The work that is done by users does not carry a warranty. The whole point of this is enthusiasts helping others that might not be so confident in doing certain works them selfs. People who do these works professionally may offer warranties however most users do not have any insurances so if something does go wrong, this lies between you and the user helping you and does NOT involve the club.

London and South East
Username: Niallharper
Area: Surrey and London
Tools available: most workshop tools including Peugeot planet. Also have a machine polisher
Works I can help with: most workshop services including diagnostics, ecu reprogramming, key reprogramming. Mostly petrol work but will try with diesels! Will do servicing, and pretty much everything (except for cambelts!) can also do machine polishing and detailing.

Username: Dum-Dum (Chris)
Area: Heathrow
Tools available: Most workshop tools (a full roll cab that is taller than I am), service book stamp, arch roller (charge for use of arch roller)
Works I can help with: most mechanical, minor fabrication, XU engine rebuilds, HDi FMIC installs.

Username: Grant
Area: Surrey, Epsom
Tools available: Most workshop tools, sthil ts400, have acces to a 1.5 ton excavator and a kettle.
Can help with: Front end suspension removal and refitting including top mounts, replacement of body panels, wheel refurbing, wiring/soldering, all basic servicing and coffee making duties.

Username: samass
Area: Kingston [South East and South East London}
Tools Available: most tools needed for any 306, plus grinder, hammers, scaffold poles for extending those breaker bars, small mig welder [tho im not very good, has been a while] and ramps, jack, stands.
Work I can help with: I'll help out with pretty much anything, can usually figure it out along the way [aslong as i dont get too blinded by rage lol], but otherwise, basic service stuff for XUD, suspension stuff, brake stuff etc. also willing to just be an extra pair of hands as and when required.

Username: PUGNUT_XS
Area: LONDON/SOUTH EAST
Tools: Own Workshop, 8t Ramp, getting more tools after being robbed!
Services: Most cars, Fully qualified mechanic. If i cant do i know a man who can.

Scotland
Username: me-tm (Matt)
Area: Aberdeen, Aberdeenshire
Tools available: Various things, no power tools but most other stuff. 2 ton trolley jack and axle stands.
Works I can help with: Servicing bicycles. Oh, cars? Erm....

Username: Moonstone2.0
Area: Scotland central belt & York
Tools available: as much as fits in the boot of a 306, favorite tool: 900mm breaker bar
Works I can help with: breaking things, making situations worse, swearing, making tea and using a propane

*tea and coffee are provided by Mrs Moonstone*

Midlands
Username: MarkTD (Mark)
Area: Midlands
Tools available: Basic tools, jack, stands, spanners, etc..
Work I can help with: Audio, Basic servicing (oil, filters, brakes etc), refurbishing alloys, paint work & detailing.

Username: td_dan (Daniel)
Area: birmingham, westmidlands area
Tools available: most tools available
Work I can help with: mainly xud work but dont mind helping on others, can do bosch conversions, cambelt/waterpump changes, rear beam changing, pretty much anything and not scared to get my hands dirty

Username: Diggers
Area: norfolk, norwich, great yarmouth
Tools: most you can think of, mig welder, 3ton Jack. 6ton axel stands, 4 years of sockets spanners and so on, torx sockets male and female. Also diagnosis avaliable
Services: any repairs, any electrical problems, fitting alarms/extras, exhausts, servicing, and MOTs (need to be pre booked)

East Anglia
Username: JJ0063
Area: Dereham/Norwich area - Norfolk
Tools available: Halfords advanced tool kit.. haha & a load of basic workshop tools. Machine polisher (oo-er), ramps & some garage space.
Works I can help with: Most general car maintenance including servicing, I've done a few bits of bodywork inc the usual 306 rusty sunroof patch repairs. Dont mind giving anyone a hand & can always offer lifts places etc.

Username: joe
Area: norwich, norfolk
Tools available: Various things,power tools, full roll cab full of tools, jacks, axle stands, access to peugeot planet software...
Works I can help with: clutches, gearboxes, cambelts, waterpumps, servicing, fitting I.C.E, alternators, starter motors, exhausts, mot failure work, turbo changes.... you name it providing its mechanical i'll do it
works i don't really like getting involved with: interior fiddly crap, painting, unless you want gloss black i'm not touching it

yeah fair rates offered for forum members drop me a pm if you need anything.

South Coast
Username: Poodle
Location: Southampton
Tools: Most tools, including welder, engine crane, press, etc. Also got a PP2000, elm327, MPPS, galletto and scangauge for diags and mapping.
Services: Full mechanical services, will do modification work. Expert in shouting at broken HDi's, general diesel freak. Persistent bugger, love scrap yard visits.

Username: Rich306
Location: Portsmouth
Tools: I have a majority of Mechanics tools, Jack and Axle stands. 
Services: I can help with mechanical bits and bobs, I've done most things from Cambelt changes to general replacement of parts. 

Things i do charge for: Black Mask services

Username: puggyhdi
Location: Portsmouth
Tools: have access to most tools, including pp2000
Services: can service petrol and diesels, install ICE, can do most work on the engine and other front end work, can deal with most body work but crap at spraying also have access to G3 and a mop, and can make a nice cuppa.

Username: Jo3 - joe
Tools available: pretty much most stuff, slide hammers, ratchets, spanners, air guns, if needed and i ask my boss i can do 4 wheel alligniment and tracking for a fee, 3 ton jack and axle stands torx screwdrivers and few special tools that come in handy.
Works I can help with: well my job is a panel beater/strip fitter/ mechanic, so main job is fixing crashed cars, doing all aspects of suspension, i can strip a car down to a bare shell, and build it back up again, enines in and out, a lot is a bit specialised but i can do it, bleed brakes, and ive also lowerd my own car so i know how to do that.

Username: 4waydiablo
Tools available: most workshop tools
Works I can help with: fixing leaking boost pipes

Username: ginge191
Area: Portsmouth
Tools available: Garage with Most workshop tools, low entry trolley jack.
Works I can help with: 306 Dturbos and Early petrols.

Username: Matt
Location: Bournemouth
Tools: basic workshop tools, axel stands, jacks and access to ramps.
Services: audio installs, panel replacement, most interior stuff, replacement removal fitting, basic xu10 engine work, basic suspension work, removing struts, fitting front springs etc.

Yorkshire
Username: THE_Liam
Area: Leeds, West Yorkshire
Tools available: Basic workshop hand tools, jacks, ramps and stands, MIG welder, power tools, wide selection of large hammers.
Works I can help with: Most general car maintenance including servicing, belts, head gaskets, pump swaps, bushes and joints, beams, and I'm a pretty good welder.
*** I haven't got a lot of free time but I'm happy to help if I can ***


Username: Sam Barker
Area: West/North/South/East Yorkshire (on the boundary of all 4 lol!)
Tools available: Enough for most jobs, welder, engine stand, engine hoist, grinders etc Smallish garage
Works I can help with: Most general car related items, mainly xud stuff! But pretty handy with most things!


Username: Jenkosowls
Location: Rotherham South Yorks
Tools: Most basic tools needed to get by Most jobs major all small. Extensive detailing and valet equipment
Services: Suspension, engine, brakes, bodywork, servicing, gearboxes, clutches and problem solving. + Detailing work from a simple wash to paint corrections and interior valet from simple hoovering to steam cleaning and stain and odour removal and many more. Available most weekends and have a good parts supplier plus many scrap yards near me
https://www.facebook.com/PrestigeAutoCare.Detail

Username: Danny2009
Area: Rotherham
Tools Avaliable: Roll cab full of tools, grinders, welder, engine crane ect
Work I can help with: cambelts, headgaskets, suspension work, wiring, welding, pretty much anything really also have a dry lit workshop with tea making facilities

Ireland

Username: Harky
Area: Northern Ireland - Ballymena
Tools available: Usual basic workshop tools - just let me know in advance
Works I can HELP with: 306 Dturbos - Basic servicing and arsing about!

South West
Username: Foxy-jim (James)
Area: Somerset/ South-West
Tools available: Basic tools, jack, stands, spanners, Slide hammer.
Work I can help with: Rear beam lowering, fiddling about with things!


Username: darrenjlobb
Area: Cornwall
Tools available: Extensive workshop tools / air / pit etc....(also have PP2000 / flashing tools and diag for other models) and lots of injection pump tooling etc.
Works I can HELP with: Most things really, but particully things that burn oil and run positive manifold pressure!

Name: Devils_Fuel (Chris)
Area: Bristol
qualified mechanic and last worked in a garage for living 10 yrs ago, i look after all my cars myself (this is my first derv so still learning but have the basic knowledge) but i get Kris B to do the annoying jobs like timing belts now as he has the knack and is quick at it
I will do light stuff like services etc on my drive or yours but heavy dirty shite i won't do as dont have a ramp and am not going to struggle for a few golden beer tokens.

Username: Ruan
Area: Gloucester
Tools available: Halfords advanced tool kit.. and some jacks etc. I don't have much in the way of tools, but most of my wage goes on tools these days...
Works I can help with: Most general car stuff including servicing, Electronics, I can do various bits and bobs with pumps if I have to, just ask, I can always say no.. Same as Darren really, if it runs on heavy oil and doesn't suck, I can usually do something with it. I can just about bear petrols if I have to, so ask away.

North
Username: Hitchos
Location: Northumberland, North East
Tools: A Hammer lol
Services: Basically If anybody needs advice on what tyres to buy or what sizes fo fit, (im an ex tyre fitter btw), oh i can aso cook

Username: mark_airey
Location: South Lakes, Cumbria
Tools: Extensive collection of most things your likely to need including air tools
Services: Happy to HELP with anything, audio installation, replacing parts, installing new shiny things, making things fit that shouldn't etc, more useful with XUD engine related things than any other engine.

Username: Jonny81191
Area: South cumbria
Tools available: General workshop tools, pretty much all you need for basic car repairs and maintenance. Arc welder with a brazing tool.
Works I can HELP with: Most general servicing and maintenance, just ask me, I can always say no!

(I'm often quite busy but will try and help if needed

Username: MartinL
Location: Cheshire
Tools: Sockets, spanners, jack, axle stand, engine crane, can get my hands on almost anything.
Services: Fully qualified mechanic, 7 years stripping cars, 3 years in a garage.
Specialize in front end suspension, brakes, fiddly jobs

Wales

Username: Seb_Ryan
Location: South Wales
Tools: Lots, (sockets, jacks, welder )anything I dont have I can get.
Services: Anything mechanical. Can do 99.9 of things on most cars
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#2
Yeh I would be up for helping people out, do most things on my cars meself anyways
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#3
No problems from me mate. When this was brought up before, the main issue was to do with traders paying to advertise, and staff not being able to limit people from agreeing work on the site and then charging for it off the site, which would mean they're making money for providing a service without having to pay for the privilege.

As we don't have any advertisements or traders on the site, I'd be happy for this to go ahead as it's definitely help out a lot of members and would hopefully help build the community spirit. If we get a large number of people on the list I'll also sticky this thread.
Reply
Thanks given by:
#4
Scott Wrote:No problems from me mate. When this was brought up before, the main issue was to do with traders paying to advertise, and staff not being able to limit people from agreeing work on the site and then charging for it off the site, which would mean they're making money for providing a service without having to pay for the privilege.

As we don't have any advertisements or traders on the site, I'd be happy for this to go ahead as it's definitely help out a lot of members and would hopefully help build the community spirit. If we get a large number of people on the list I'll also sticky this thread.

I thought this might be the case but did want to mention about their views over on .net just in case you had any other reasons why it was a bad idea. But seeing as you don't, get your names down guys! We all know peugeots are always broken haha
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#5
Hmmmm, I dont even have enough time to finish mine ATM so working on others aint likely unless its something fun.

However
Username: Dum-Dum (Chris)
Area: Heathrow
Tools available: Most workshop tools (a full roll cab that is taller than I am)
Works I can help with: most mechanical, minor fabrication, XU engine rebuilds.

Edit; forgot to say I prefer taking stuff apart to putting it back together so if your breaking or going on a scrap yard trip then im game.
Reply
Thanks given by:
#6
Username: Moonstone2.0
Area: Scotland central belt & York
Tools available: as much as fits in the boot of a 306, favorite tool: 900mm breaker bar
Works I can help with: breaking things, making situations worse, swearing, making tea and using a propane.
[Image: ocpic2.pg.jpg]
http://www.sanderson-brown.com
MrsMoonstone Wrote:Cats eyes get in the way of the racing line!
Moonstone HDi Phase 3- Scrapped Sad --- 1.6 Phase 2 - Scrapped Sad --- BMW 318is 1993 (Hyperventilates)
Reply
Thanks given by:
#7
I'd be up for helping people with servicing and minor jobs around the Ipswich/Felixstowe area........ Smile
Reply
Thanks given by:
#8
Username: MrsMoonstone
Area: Central Belt (Scotland), Lanarkshire, North Yorkshire
Tools: Erm... Bring your own!
If you fix my car, I'll make you tea/coffee and good home made food to keep you happy. (No, food cannot be exchanged for sexual favours!)
Reply
Thanks given by:
#9
MrsMoonstone Wrote:Username: MrsMoonstone
Area: Central Belt (Scotland), Lanarkshire, North Yorkshire
Tools: Erm... Bring your own!
If you fix my car, I'll make you tea/coffee and good home made food to keep you happy. (No, food cannot be exchanged for sexual favours!)


Ahhh you beat me to it!


Username: Kimmiekat
Area: 8 miles from Heathrow
Tools: Kitchen
If you're helping Scott/Scott's helping you, I'm happy to provide tea, coffee, bacon sarnies and cakes Smile
[Image: kim.png]
Reply
Thanks given by:
#10
MrsMoonstone Wrote:Username: MrsMoonstone
Area: Central Belt (Scotland), Lanarkshire, North Yorkshire
Tools: Erm... Bring your own!
If you fix my car, I'll make you tea/coffee and good home made food to keep you happy. (No, food cannot be exchanged for sexual favours!)
Area: Scotland central belt & York
Tools available: as much as fits in the boot of a 306, favorite tool: 900mm breaker bar
Works I can help with: breaking things, making situations worse, swearing, making tea and using a propane.[/quote]

Hmm one wants car fixing the other one can kinda do that
You both have similar forum names showing a love for a colour
You both live in a similar location
One needs tools and the other has lots
This could be a match made in heaven!! You two shoudl hook up!

Ill help out in portsmouth area :-) i have some tools and little knowledge. I will stand there and look pretty a lot
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#11
Username: Grant
Area: Surrey, Epsom
Tools available: Most workshop tools, sthil ts400, have acces to a 1.5 ton excavator and a kettle.
Can help with: Front end suspension removal and refitting including top mounts, replacement of body panels, wheel refurbing, wiring/soldering, all basic servicing and coffee making duties.
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#12
Username: td_dan (Daniel)
Area: birmingham, westmidlands area
Tools available: most tools available
Work I can help with: mainly xud work but dont mind helping on others, can do bosch conversions, cambelt/waterpump changes, rear beam changing, pretty much anything and not scared to get my hands dirty Smile
Vehicle repair and servicing in the midlands pm for details 

Current cars
Subaru Impreza 2.0d - Daily
306 1.8 - track whore soon to be GTI6
Reply
Thanks given by:
#13
Username: Jo3 - joe

Area: Portsmouth and area's

Tools available: pretty much most stuff, slide hammers, ratchets, spanners, air guns, if needed and i ask my boss i can do 4 wheel alligniment and tracking for a fee, 3 ton jack and axle stands torx screwdrivers and few special tools that come in handy.

Works I can help with: well my job is a panel beater/strip fitter/ mechanic, so main job is fixing crashed cars, doing all aspects of suspension, i can strip a car down to a bare shell, and build it back up again, enines in and out, a lot is a bit specialised but i can do it, bleed brakes, and ive also lowerd my own car so i know how to do that.

for those of you that know me or on my facebook know my trade and know i will help out people anyway so thought ill make a post in here.
Reply
Thanks given by:
#14
Niall will you add to mine "Specialist in HDi FMIC fitting" and also to the tools "Service Stamp"
Reply
Thanks given by:
#15
Yorkshire
Username: THE_Liam
Area: Leeds, West Yorkshire
Tools available: Basic workshop hand tools, jacks, ramps and stands, MIG welder, power tools, wide selection of large hammers.
Works I can help with: Most general car maintenance including servicing, belts, head gaskets, pump swaps, bushes and joints, beams, and I'm a pretty good welder.
*** I haven't got a lot of free time but I'm happy to help if I can ***
[Image: tapatalk_1427020983519_zpsnwvozlhb.jpeg]
Reply
Thanks given by:
#16
Stickied Smile Thanks for keeping the first post updated Niall. If anyone else is interested/wants to put their name down, can you please follow a similar template to the ones in the first post. Cheers
Reply
Thanks given by:
#17
Username: ginge191
Area: Isle of Wight
Tools available: Most workshop tools, low entry trolley jack.
Works I can help with: 306 Dturbos and Early petrols.

If anyone ever gets stuck down here or needs help, i know foob once relied on me ninja, gimmie a shout Smile
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#18
Username: Harky
Area: Northern Ireland - Ballymena
Tools available: Usual basic workshop tools - just let me know in advance
Works I can HELP with: 306 Dturbos - Basic servicing and arsing about!

Don't know that theres that many N.I. ones on here but a well!
Gov modded 11mm Bosch + Standard turbo = 137.2bhp . . . . TD04 now in...time to get playing!
Reply
Thanks given by:
#19
Username: darrenjlobb
Area: Cornwall
Tools available: Extensive workshop tools / air / pit etc....(also have PP2000 / flashing tools and diag for other models) and lots of injection pump tooling etc.
Works I can HELP with: Most things really, but particully things that burn oil and run positive manifold pressure!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#20
Username: Matt
Location: Bournemouth
Tools: basic workshop tools, axel stands, jacks and access to ramps.
Services: audio installs, panel replacement, most interior stuff, replacement removal fitting, basic xu10 engine work, basic suspension work, removing struts, fitting front springs etc.
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#21
Eastern Counties

Username: JJ0063
Area: Dereham/Norwich area - Norfolk
Tools available: Halfords advanced tool kit.. haha & a load of basic workshop tools. Machine polisher (oo-er), ramps & some garage space.
Works I can help with: Most general car maintenance including servicing, I've done a few bits of bodywork inc the usual 306 rusty sunroof patch repairs. Dont mind giving anyone a hand & can always offer lifts places etc.
Reply
Thanks given by:
#22
Guys this is great the amount of members willing to help. Before too long will have a nationwide 306oc repair service!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#23
Username: mark_airey
Location: South Lakes, Cumbria
Tools: Extensive collection of most things your likely to need including air tools
Services: Happy to HELP with anything, audio installation, replacing parts, installing new shiny things, making things fit that shouldn't etc, more useful with XUD engine related things than any other engine.
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#24
Username: Jonny81191
Area: South cumbria
Tools available: General workshop tools, pretty much all you need for basic car repairs and maintenance. Arc welder with a brazing tool.
Works I can HELP with: Most general servicing and maintenance, just ask me, I can always say no!

(I'm often quite busy but will try and help if needed)
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#25
Oh also will you add I has arch roller (although i dont give that out for free)
Reply
Thanks given by:
#26
I guess i should put my details up......

southwest (bristol)
qualified mechanic and last worked in a garage for living 10 yrs ago, i look after all my cars myself (this is my first derv so still learning but have the basic knowledge) but i get Kris B to do the annoying jobs like timing belts now as he has the knack and is quick at it
I will do light stuff like services etc on my drive or yours but heavy dirty shite i won't do as dont have a ramp and am not going to struggle for a few golden beer tokens.

I have enough tools to look after a 306 comfortably


Oi connor get your shite up ere !!
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#27
Username: Hitchos
Location: Northumberland, North East
Tools: A Hammer lol
Services: Basically If anybody needs advice on what tyres to buy or what sizes fo fit, (im an ex tyre fitter btw), oh i can aso cook
Phase 1 306 Dturbo Sigma Blue a.k.a THE LADY

[Image: redranger.jpg]
Reply
Thanks given by:
#28
Niall can you please edit my name? Devils_fuel (Chris)

Chars
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#29
Username: Ruan
Area: Gloucester
Tools available: Halfords advanced tool kit.. and some jacks etc. I don't have much in the way of tools, but most of my wage goes on tools these days...
Works I can help with: Most general car stuff including servicing, Electronics, I can do various bits and bobs with pumps if I have to, just ask, I can always say no.. Same as Darren really, if it runs on heavy oil and doesn't suck, I can usually do something with it. I can just about bear petrols if I have to, so ask away.
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Wink
Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Reply
Thanks given by:
#30
Username: Sam Barker
Area: West/North/South/East Yorkshire (on the boundary of all 4 lol!)
Tools available: Enough for most jobs, welder, engine stand, engine hoist, grinders etc Smallish garage
Works I can help with: Most general car related items, mainly xud stuff! But pretty handy with most things!
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)