Car won't start? Starter Motor?

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Car won't start? Starter Motor?
#1
Exclamation 
Today after I finished work the 205 wouldn't start, it appeared to be flat as a pancake.

I had to get a bump start and drove it to my field / workshop and put the battery on charge for at least 2 hours.

After having charged the battery I immediately started it and it was fine, I then drove home 5 miles and parked it up for an hour. After the hour passed I went to start it and it wouldn't start again so I had to jump it.

The lights weren't dimmed down or anything which I thought was strange.

Does this signal the starter motors dead? If so are they easy enough to fit? The 205 is using the XU7 one on the XU9 atm so if it's easy enough I'll pop a XU9 one on there.

Any suggestions / advice is much appreciated!
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#2
Sounds like alternator to me.

Starter motors make a horrible grinding noise when they are on there way out.
On the 306 waiting list.
Reply
Thanks given by:
#3
Well I've got a new alternator belt to fit as my current one on there is shredded slightly but that shouldn't stop the alternator from working should it?

Also the car was driven 5 miles and left an hour after being fully charged and then failed to start?
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#4
Sounds to me like your battery has given up!
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#5
Mmm... I've got some spare so I'll charge one right up and swap it over. Hopefully it's that simple.

I've been told starter solenoids are commonly at fault for starting issues.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#6
Ill speak to you tomorrow at some point mate
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#7
Oh-ar, look forward to it me lover.
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#8
give the starter a knock with a hammer, hard piece of wood etc when you try and start it...if it goes, points to jammin starter
Wishes for more power...
Reply
Thanks given by:
#9
I reckon battery has given up or could be a dodgy earth on the battery.
Bye Bye D-Turbo
Phase 1 GTi-6 now has a new owner
Rolling in the: Phase 3 HDI Wagon

The current estate project: http://306oc.co.uk/forum/thread-22237.html
Reply
Thanks given by:
#10
Sounds like your battery to me, swap another one onto it and see..
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#11
(17-02-2013, 11:41 PM)Piggy1987 Wrote: give the starter a knock with a hammer, hard piece of wood etc when you try and start it...if it goes, points to jammin starter

this is worth a shout . . .done this on a few cars before . .Smile
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
#12
Make sure the battery terminals are clean and greased up Smile
Doesnt even own a 306.
Reply
Thanks given by:
#13
It was the battery (thankfully)!
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ph1 starter motor relay box? BenDturbo1 4 1,043 23-11-2013, 01:36 PM
Last Post: HDIkyle
  Starter motor; XUD/XU10 ginge191 6 1,758 19-08-2013, 09:33 PM
Last Post: Rich306
  Starter motor spinning Kilifi 9 2,882 18-07-2013, 07:58 PM
Last Post: Kilifi

Forum Jump:


Users browsing this thread: 1 Guest(s)