'Black' Masking Headlights

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
'Black' Masking Headlights
#1
Just a few questions.

First, with black masking crystals, I'm assuming that people use a matt black paint, wondering if a gloss black would work just as well or if anyone has or seen what it would like in graphite (rims are going to be that colour, so it would match them)

Also, they almost, slightly, nearly, kind of, dont fit in the oven (which is how i've heard you separate them), is there any other options?


Cheers
Reply
Thanks given by:
#2
use whatever paint you want, gloss or matt is fine

other options are heat gun or if you have depo's then you may be lucky with a hot hair dryer Big Grin
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#3
I used a hair dryer for mine (depo)
<!-- l --><a class="postlink-local" href="http://www.306oc.co.uk/forum/viewtopic.php?f=30&t=3212&hilit=Mask+depo" onclick="window.open(this.href);return false;">viewtopic.php?f=30&t=3212&hilit=Mask+depo</a><!-- l -->



Reply
Thanks given by:
#4
Brilliant cheers, so I would have to hold a hair dryer over it for about half an hour then! What do you mean by depo? is that a make?

Might have to get vengeful with a hammer Big Grin
Reply
Thanks given by:
#5
Yes depo is the make if you have got valeo you will probly struggle to open them with a hair dryer if you have depos it can be done with hair dryer just heat a section at a time and gently prise them open Smile as i did in them pictures Smile



Reply
Thanks given by:
#6
heat gun will work.. bring them over at some point, I'll get them apart for you
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#7
^^^^^ this if you have valeo Big Grin



Reply
Thanks given by:
#8
heat gun works a trick but dont burn yourself like somebody i know did ninja erm... gloss black would probably look better than matt black tbh. Ive been thinking of doing mine in ford sea grey so will have to see how it goes!
Reply
Thanks given by:
#9
good luck with this mate. matt/gloss black imo.
[Image: newsig_zpsee86fa10.jpg]
Reply
Thanks given by:
#10
I was going to say what Jonny said Smile I will get them apart........

But is Jonny is having a go then standard procedure is to give me a ring once he breaks them lmao
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#11
I won't break them.. anyway, there's a spare set here, and Carl has 2 sets. It'll be fine!
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#12
Lets not lie, you do have a tendency to break things Tongue
Reply
Thanks given by:
#13
Graphite grey? SO last year...

[Image: 15072011543.jpg]

And on the estate

[Image: DSCF1867copy.jpg]
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#14
The graphite looks nice. Smile. Been wondering where the yellow sundance went to Smile.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#15
Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyer

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#16
just be more patient with a heat gun, then ease the lens out, don't force it!.
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#17
puglove Wrote:Be very careful with a heat gun a dont force it as you will snap the lense as i found out lol, oven FTW every time, iv done 4 sets via the oven now and it 100x easyer
how long in the oven and what temp?
[Image: newsig_zpsee86fa10.jpg]
Reply
Thanks given by:
#18
45 mins at gas mark 7 or until it's golden brown
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#19
I like the graphite, doing them black just seems a bit too 'typical'

haha remember its not food and wont taste nice Big Grin
Reply
Thanks given by:
#20
Jonny81191 Wrote:45 mins at gas mark 7 or until it's golden brown
whats that in electric? Wink
[Image: newsig_zpsee86fa10.jpg]
Reply
Thanks given by:
#21
I usually just whack it up full n hope I don't burn anything. But as for head lights no idea Sad
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#22
50 degrees roughly, good temperature to melt shit
[Image: signature_zps1a02ba79.jpg]
Reply
Thanks given by:
#23
im on it like a tramp on luke warm chips.
[Image: newsig_zpsee86fa10.jpg]
Reply
Thanks given by:
#24
lowest setting possible for the oven and leave them in for like 20 mins ish (until they are nearly too hot to touch) and then use a heat gun to keep it warm where the glue is Smile
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#25
Might have a trip to scrappy at weekend and have a to at these for fcs.
#2 Moonstone Blue HDI
[Image: 6b0c7309-5184-463c-9f73-2a7b96601418_zpsfdf041fe.jpg]
Reply
Thanks given by:
#26
Thinking of doing mine also.. but shadow chrome...

But that might be too subtle...
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#27
...... what's ........ th...........e crack... wi..th all ....... the .......................???
Reply
Thanks given by:
#28
lmao you grumpy bastard Carl Tongue


Jonny81191 Wrote:Thinking of doing mine also.. but shadow chrome...

But that might be too subtle...

If you haven't split a set of Valeo lights you are in for a shock Tongue

And yes shadow chrome would be too subtle Wink
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#29
I have split Valeos before, I know what I'm getting into here lol

Yeah, might just go the wholoe hog and black 'em.......................................................................................
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#30
Jonny81191 Wrote:I have split Valeos before, I know what I'm getting into here lol

Yeah, might just go the wholoe hog and black 'em.......................................................................................

Ok......................... good good......................... just checking Smile

Black is the way to go....................................or something dark coloured at least.............................once you go black you never go back............................. lmao
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Black masking phase 3 headlights philpemberton94 1 1,065 30-04-2014, 07:57 PM
Last Post: Piggy
  Black Masking headlights LewisG 4 1,530 10-04-2014, 08:03 PM
Last Post: LewisG

Forum Jump:


Users browsing this thread: 2 Guest(s)