Hi all had a couple hours spare today so set about making a start on the front suspension. Billstein b12 kit and everything else new, genuine Peugeot. Was going great but my phase 2 gti6 has 16mm hubs and I got 18mm ball joints! Not a problem I thought because I have a phase 3 xsi and was sure they would be 18mm. Nope they was 16mm also (or at least the driver side was so that stopped play for today. Got some on the bay so will get it done next weekend now lol. PITA !!!
306oc - Peugeot 306 Owners Club & Forum
›
306 Repairs & Mods
›
Suspension, Transmission, Handling & Braking
Decent few hours on the front of the 6 this afternoon
Decent few hours on the front of the 6 this afternoon
|
Decent few hours on the front of the 6 this afternoon
|
08-05-2016, 07:09 PM
Getting deja vu reading that lol.
Wtf happened to that spring!? 
08-05-2016, 07:17 PM
08-05-2016, 07:20 PM
(08-05-2016, 07:09 PM)Toms306 Wrote: Getting deja vu reading that lol. Lol just making sure that you read it enough times!!!! Lmao one day I will learn how to use the forum properly but until then ile keep repeating myself, repeating myself!!! Ha ha . Erm I cut it coz I couldn't be arsed to undo the new spring and the kit I bought doesn't include a new top bit thingy from billstein or Peugeot so just cut then up 
Posts: 5,902
Threads: 142 Joined: Dec 2011 Reputation: 58 Location: Hastings, East Sussex Car Model/Spec: E46 BMW 320d 
Thanks: 17
Given 28 thank(s) in 28 post(s)
08-05-2016, 07:21 PM
Looks like you had fun then!
 Oh, I edited your post for you to remove the multitude of duplicate quotes. God only knows how you managed that.  You're welcome though. 
![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg)
08-05-2016, 07:27 PM
(08-05-2016, 07:21 PM)WiNgNuTz Wrote: Looks like you had fun then! Thanks fella as you can tell Iv mastered the art of the forum!!! Lol at 42 years old I still have trouble with ANYTHING to do with electronic Devizes . Erm yeah had fun but at least it was sunny
Posts: 5,902
Threads: 142 Joined: Dec 2011 Reputation: 58 Location: Hastings, East Sussex Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
08-05-2016, 07:47 PM
Age is irrelevant mate, I'm sure you'll get there in the end.
At least you're trying!
08-05-2016, 08:07 PM
You cut a spring under pressure? Not sure I would've done but looks like it worked lol!
08-05-2016, 08:21 PM
(08-05-2016, 08:07 PM)Toms306 Wrote: You cut a spring under pressure? Not sure I would've done but looks like it worked lol! Yes mate it was not too bad just got a lil pissy with it because I needed the spring top plate that goes under the top mount. Tbh it wasn't my greatest idea but I still got 9 fingers left....... O bugger where did number 10 go
08-05-2016, 08:22 PM
(08-05-2016, 08:21 PM)Xsikid Wrote:(08-05-2016, 08:07 PM)Toms306 Wrote: You cut a spring under pressure? Not sure I would've done but looks like it worked lol! Haha, who needs all 10 anyway!
08-05-2016, 09:11 PM
I have had a f*ck on with mine, due to bolts been a bastard and the wrong springs been given to me, so the car had a 2 inch lift from standard! I had to go to Peugeot in the end, for the correct springs, as I am not f*cking about anymore with pattern copy stuff.
08-05-2016, 09:42 PM
(08-05-2016, 09:11 PM)procta Wrote: I have had a f*ck on with mine, due to bolts been a bastard and the wrong springs been given to me, so the car had a 2 inch lift from standard! I had to go to Peugeot in the end, for the correct springs, as I am not f*cking about anymore with pattern copy stuff. I'm with you on that bud Iv fitted cheaper parts before but in the end they aren't as good so best to buy genuine me thinks
15-05-2016, 10:42 AM
Well I finally finished drivers side started on passenger side but I can't undo the hub nut. Jaysus the drivers side wasn't that hard!! Just downed a can or red bull so hopefully with my new found wings it will fly off now :-))
15-05-2016, 12:26 PM
Well that's fooked it just snapped my 1/2 inch breaker bar FFS! Sometimes peugeots just win. Hate that grrrrr
15-05-2016, 06:02 PM
Drilled it then split the nut in the end!! All that's left now is to torque the hub nuts up next weekend then I'm just about ready for f c s
17-05-2016, 11:43 AM
At least someone is ready for fcs
I'm no where near
![[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]](http://i35.photobucket.com/albums/d196/mattbush/20A1806D-891D-40FB-BD52-AD519177A607-7340-0000058F46391753.jpg) TEAM CONROD SHITTING RALLYE!
17-05-2016, 05:25 PM
17-05-2016, 06:04 PM
I've only got a few bits to make right and I'll be happy
TEAM CONROD SHITTING RALLYE! 
20-05-2016, 07:15 PM
(08-05-2016, 07:09 PM)Toms306 Wrote: Getting deja vu reading that lol. its an IKEA Flat pack spring Given the choice between Niall and the sheep. I would choose the sheep!
/Toseland |
|
« Next Oldest | Next Newest »
|
not long now thou mate
Users browsing this thread: 2 Guest(s)